SK-3133-PPQ

Heavy-Duty Outdoor Access Control Keypad with Proximity Reader

The ENFORCER SK-3133-PPQ features rugged construction with a heavy-duty stainless-steel faceplate and a coated steel backing to withstand the elements.

  • product_icon
  • product_icon
  • product_icon
  • Rugged construction – heavy-duty stainless steel faceplate with coated steel housing
  • Built-in proximity reader
  • 12~24 VAC/VDC Auto-adjusting operation
  • Up to 1,000 possible user codes/cards for output 1 and 100 each for outputs 2 and 3
  • Up to 50 possible visitor codes, for one-time or limited-time use (1~99 hours)
  • Up to 50 duress codes for output 1 and 10 each for outputs 2 and 3
  • Output 1: Form C relay, 5A@24VDC max. / output 2 and 3: Form C relay, 1A@24VDC max.
  • Outputs 1, 2 and 3 can be programmed to activate for up to 99,999 seconds (nearly 28 hours)
  • Tamper output, 50mA@24VDC max.
  • All features are programmed directly from the keypad, no need for an external programmer
  • EEPROM Memory protects programmed information in case of power loss
  • Egress input lets users exit the premises without keying in the code
  • Door sensor input for anti-tailgating operation
  • Interlocking input for connecting to a second keypad
  • Keypad illuminates when a button is pressed, programmable for FULL or AUTO in standby
  • Vandal resistant, suitable for wall, post, or gooseneck mounting
  • IP66 Weatherproof
Type Heavy-Duty, Outdoor, Stand-Alone Keypad
Operating Voltage 12~24 VAC/VDC
Current Draw – Standby 55mA@12VDC
Current Draw- Relays Active 220mA@12VDC
Relay Output- #1 5A@24VDC
Relay Output- #2 1A@24VDC
Relay Output- #3 1A@24VDC
IP Rating Weatherproof IP66
Egress Inputs N.O. Ground (P.B)
Operating Temperature -4º~158º F (-20º~70º C)
Dimensions 5-1/4″x7-1/16″x3-3/8″ (133x180x85 mm)
Weight 3-lb 12-oz (1.7kg)

Product Information Sheet (PI)

Manual

User Control Chart

Advertisement

User code doesn’t work
  • Make sure you programmed a User Code instead of a Super User or Common User Code.
  • Try deleting the super user code and common user code then reprogramming the user code.
Master programming code doesn’t work
  • See the DAP process
Keypad constantly beeps on power-up
  • This is a normal operation. Press 12# to prematurely stop the beeping.

No upsell products found

Scroll to Top