Follow us on:           


Twin Photobeam Detectors with Laser Beam Alignment [190ft (60m) outdoors, 390ft (120m) indoors*] (Discontinued)

Model Number: E-960-D190GQ
*Special order. Contact SECO-LARM for details.

ENFORCER Long Range Photobeam Detectors are easy-to-install with laser beam alignment and provide extended range. Designed to provide reliable perimeter security both indoors 
and outdoors.
  • Built-in laser beam alignment system speeds accurate, reliable positioning.
  • Twin infrared beams provide reliable perimeter security, minimizing false alarms from falling leaves, birds, etc.
  • Lensed optics reinforce beam strength & provide excellent immunity to false alarms due to rain, snow, mist, etc.
  • Weatherproof, sunlight-filtering case for indoor & outdoor use.
  • Non-polarized power inputs.
  • Anti-frost system so that beam functions even in extreme conditions.
  • Automatic input power filtering with special noise rejection circuitry.
  • NC/NO trigger output.
  • N.C. tamper circuit included.
  • "U" Brackets included for pole mounting.
  • Quick, easy installation with built-in laser beam alignment system.
  • Monitored output: N.C., 10kΩ Resistor.
Max. Range (Outdoor) 190' (60m)
Max. Range (Indoor) 390' (120m)
Current 150mA
Power 12-30VDC/AC 60Hz, 200mA (non-polarized)
Detection Method Simultaneous break of 2 beams
Interrupt Speed 10msec
Alarm/Trigger Output SPDT NO/NC/COM relay, 1A@30 VDC/VAC
Tamper Output N.C. switch, 1A@30 VDC/VAC
LEDs - Red ON indicates transmitter and receiver not aligned or bream is broken
LEDs - Yellow ON indicates weak receiver signal or beam is broken
LEDs - Green ON indicates unit connected to power
Laser Wavelength 650nm
Laser Output Power <5mW.
Alignment Angle Horizontal (+/-)90º, Vertical: (+/-)5º
Operating Temperature -13º~+131º F (-25º~+55º C)
Weight 2.5-lb (1.1kg)
Case PC Resin