E-960-D90GQ

Twin Photobeam – ETL UL325 Compliant, 90ft Outdoor

Long Range Photobeam Detectors are easy-to-install with laser beam alignment and provide extended range. Designed to provide reliable perimeter security, both indoors and outdoors.

  • product_icon
  • product_icon
  • product_icon
  • Twin beams minimize false alarms from falling leaves, birds, etc.
  • Lensed optics reinforces beam strength and provides excellent immunity to false alarms due to rain, snow, mist, etc.
  • Weatherproof (IP55), sunlight-filtering case
  • Non-polarized power inputs
  • Anti-frost system
  • Automatic input power filtering with special noise rejection circuitry
  • NO/NC trigger output
  • N.C. tamper circuit included
  • “U” brackets included for pole mounting
  • Quick, easy installation with built-in laser beam alignment system
  • Monitored output: N.C. or 10kΩ resistor on N.O. output
Type Twin Photobeam Detector with Laser Beam Alignment
Current Draw 50mA max (laser align only). 150mA max. (active operation excluding laser alignment)
Sensing Range Outdoor – 90′ (30m), Indoor- 190′ (60m)
Operating Voltage 12~30 VDC/VAC 60Hz, 200mA
IP Rating IP55 Weatherproof
Interupt Speed 10ms
LEDs – Red “ON” indicates transmitter and receiver not aligned or beam is broken
LEDs – Yellow ON indicates weak receiver signal or beam is broken
LEDs – Green ON indicates unit connected to power
Alarm Output SPDT NO/NC/COM relay, 1A@30VDC/VAC
Tamper Output N.C. switch, 1A@30VDC/VAC
Case material PC Resin
Laser Wavelength 650nm
Operating Temperature -13º~+131º F (-25º~+55º C)
Laser Output Power <5mW
Alignment Angle Horizontal (+/-)90º, Vertical: (+/-)5º
Weight 2.5-lb (1.1kg)

 

Product Information Sheet

Manual

No upsell products found

Scroll to Top