Follow us on:           


Single Photoelectric Beam Sensor, 90ft (Discontinued)

Model Number: E-961-S90WQ
  • 90Ft (30m) sensing distance for protecting large openings or wide roadways
  • Weather-proof to IP66 standards for indoor and outdoor use
  • Mounts flat or at a 90-degree angle to the wall with no need for extra brackets
  • Adjustable lens angle
  • Transmitter power can be adjusted to match local environment
  • 1A relay output (NO/NC/COM)
  • AC/DC 10~24V operation, non-polarity connection
  • Internal terminal block for easy wiring
  • Mounting screws included
Typical Applications
  • Gates or garage doors
  • Overhead doors
  • Parking lots
  • Driveways
  • Warehouses
Type NIR Through-Beam Photoelectric Sensor
Current Draw 33.5mA (Tx), 27.5mA (beam aligned), 13mA (beam broken) (Rx)
Sensing Range 90' (30m)
Operating Voltage AC/DC, 10~24V
Reaction time 100ms (Max)
Light Source IR LED
LEDs - Red ON for standby (TX)
LEDs - Green show power (RX)
Output 1A, 120VAC, NO/NC/COM
Operating Temperature -13º~140º F (-25º~60º C)
Dimensions 3-3/8” x 2-3/8” x 1-7/16” (86.5 x 59 x 40 mm)
Alignment Angle Horizontal +/-5º, vertical +/-5º
Emitting Element Infrared LED
Transmitter Adjust Long vs. short distance
Illumination Lamplight <10,000 lux, sunlight <30,000 lux
Noise Resistance 1,500 Vp-P/1us
Vibration Resistance 10~55 Hz/1.5mm, 2 hours in X.Y.Z. phase
Weatherproof IP66 standard
Safety CE standard
Material Case - nylon, lens - polycarbonate
Ambient Temp. -13º~140º F (-25º~60º C)