IR Curtain Sensors for Indoor/Outdoor Access Control, 25ft

Model Number: E-9644-6W25
These infrared photobeam curtain/barrier sensors are perfect for installation in windows, doorways, skylights, fence tops, any place where space is limited.
Suitable for indoor and outdoor perimeter security, the trigger is programmable for simultaneous breaking of any single or 2 adjacent beams. The design features rugged aluminum construction, and an anti-tamper circuit for triggering an alarm if power is cut or the end cap  is removed.
No synchronizing wires are required and the LED alignment indicator makes installation easy. L-brackets and mounting hardware are included.
  • Rugged aluminum construction
  • LED alignment indicator
  • No synchronizing wires required
  • NO/NC relay output
  • Weatherproof IP65 construction
  • Slimline design (7/8" x 1-5/16" cross section)
  • Trigger by simultaneously breaking 2 adjacent beams or any single beam (programmable)
  • For windows, doorways, etc., where space is limited
  • L-brackets and mounting hardware included
  • 3 Programmable frequencies eliminate interference
    when installing multiple sensors in close proximity
Type IR Curtain Sensors for Indoor/Outdoor Access Control
Current Draw Standby- 94mA, Active- 79mA
Number of Beams 6
Sensing Range 25' (8m) outdoor, 50' (16m) indoor
Operating Voltage 12~24VDC
Reaction time 0.5~48.5 ms
Detection System Simultaneous break of 2 adjacent beams or any single beam (programmable)
LEDs (On): powered, aligned properly, (Flash): when beam is broken, (Off): no power
Case material IP 65 / Aluminum alloy
Output NO/NC relay output, 1A @ 12~24VDC
Operating Temperature -49º~131º F (-45º~55º C)
Dimensions 44-1/2" x 1-5/16" x 7/8" (1130 x 33 x 22 mm) [Length x Width x Height]
Hardware Mounting Bracket Included