Follow us on:           


IR Curtain Sensors for Indoor/Outdoor Access Control, 25ft

Model Number: E-9680-10B25
These infrared photobeam curtain/barrier sensors are perfect for installation in windows, doorways, skylights, fence tops, any place where space is limited.
Suitable for indoor and outdoor perimeter security, the trigger is programmable for simultaneous breaking of any single or 2 adjacent beams. The design features rugged aluminum construction, and an anti-tamper circuit for triggering an alarm if power is cut or the end cap  is removed.
No synchronizing wires are required and the LED alignment indicator makes installation easy. L-brackets and mounting hardware are included.
  • Rugged aluminum construction
  • LED alignment indicator
  • No synchronizing wires required
  • NO/NC relay output
  • Weather-resistant IP54 construction
  • Slimline design (7/8" x 1-5/16" cross section)
  • Trigger by simultaneously breaking 2 adjacent beams or any single beam (programmable)
  • For windows, doorways, etc., where space is limited
  • L-brackets and mounting hardware included
  • 3 Programmable frequencies eliminate interference
    when installing multiple sensors in close proximity
Type IR Curtain Sensors for Indoor/Outdoor Access Control
Number of Beams 10
Sensing Range 25' (8m) outdoor, 50' (16m) indoor
Rx Standby Current 110mA
Tx Standby & Active Current 100mA
Operating Voltage 12~24VDC
Reaction time 0.5~70 ms
Detection System Trigger by simultaneously breaking 2 adjacent beams or any single beam (programmable).
LEDs (On): powered, aligned properly, (Flash): when beam is broken, (Off): no power
Alarm Output NO/NC relay output, 1A @ 12~24VDC
Operating Temperature -49º~131º F (-45º~55º C)
Dimensions 79" x 1-5/16" x 7/8" (2010 x 33 x 22 mm) [Length x Width x Height]
Enclosure IP54 Weather-resistant / Aluminum alloy
Hardware Mounting Bracket Included