|
RF Remote Controlled Anti-Hijack Vehicle Security System from SECO-LARM.
Features include 2nd channel output, flashing parking light relay, outputs for power door lock/unlock, and an output for starter disable. Includes 2-stage shock sensor, LED, VET switch, multi-tone siren, and more.
(1) Miniature Brain (3 x 23/4 x 11/4)"
- Patented Q.Q.T. for quick and quiet test of alarm.
- Patented Fail-Safe Arming verifies the alarm will arm passively.
- Patented Phase-II Protection assures continual protection.
(2) 5-Function LED
- Indicates alarm arming (in passive mode), armed, and disarmed, plus valet mode.
- Indicates RF transmitter reception for troubleshooting.
- Indicates anti-hijack status.
(3) Multi-Function Push-Button
- Valet (panic can still be activated).
- Emergency Disarm (sets alarm to passive arming and gives a 10-sec. entry delay).
- One-time override of passive arming.
- Feature programming and code learning.
- Disables anti-hijack mode.
(4) Starter Disable Output
- Disables starter once alarm is armed.
- Triggers alarm if thieves attempt to start car.
(5) Door Lock Outputs
- Lock/unlock doors via remote, even while driving or in valet.
- Programmable ignition-controlled door lock/unlock.
(6) On-board Dual-Stage Shock Sensor (patented)
- Adjustable trigger and pre-trigger.
- Chirps siren if a light tap to the vehicle is detected, triggers alarm if a strong rap is detected.
- Revolutionary new design.
| |
(7) 124dB Multi-Tone Siren
- Multi-tone siren, but no "toy" sounds.
- Chirps indicate armed, disarmed, pre-intrusion, zone bypass, sensor bypass.
- During anti-hijack, siren chirps or sounds to indicate status.
(8) Flashing Parking Lights (Built-in relay)
- Flash for armed, disarmed, pre-intrusion, zone bypass, sensor bypass, trigger & tamper.
- Flash to indicate alarm is in hijack mode.
- Pos./neg. output, single- or dual-circuit.
(9) 2 Two-Button, Two-Channel Transmitters
- Arm/disarm up to 200 ft.
- 68 billion possible codes.
- RF anti-scan protection.
- Code learning of up to 4 remotes.
- RF codes stored in EEPROM are saved even if power is lost to the alarm brain for up to one year.
- 2nd ch. RF output.
- Chirp delete, zone bypass, sensor bypass, and panic via remote.
- RF CodeWash™ deletes all codes during code learning to prevent use of lost or stolen remotes.
(10) Instant Triggering
- 6 inputs trigger alarm when trouble occurs.
(11) Multiple Programming Functions
- Active or Pasive Arming.
- Current and/or switch sensing.
- Chirp or silent arming.
(12) Multiple Programmable Anti-Hijack
- Simple-to-use anti-hijack function goes through a series of steps involving LED, siren, and parking lights once anti-hijack is activated.
|
|
