ENFORCER® 295 Panel de Control de SECO-LARM®

5 Entradas, zonas separadas (super alta protección para transladarlo). N.O. or N.C. (selectable) instant zone with exit delay. N.C. instant zone with exit delay. N.C. delay zone with entry and exit delays. N.O. 24-hour panic zone with no entry and exit delays. N.C. 24-hour tamper zone instant trigger no delay. 5 Zonas y switches que se mantienen, correspondientes a las 5 salidas de las zonas. Shunt out any zone that is not working properly to prevent false alarmas. All inputs are super-high-transient protected. 3 Ajustables temporizadores. Entry delay timer adjustable from 1 sec to 45 sec. Exit delay timer adjustable from 1 sec to 45 sec. Alarm duration timer adjustable from 3 sec to 20 min.

9 LEDs estados, todos son visibles cuando el gabinete esta cerrado. (LEDs #1-5) Individual zone status green LEDs. Total zone status green LED. Indicates total zone status of the five zones. Arm/disarm/shunt status red LED. Indicates if alarm is armed, disarmed, or if a zone has been shunted. Entry/Exit status yellow LED. Indicates if alarm is in entry or exit delay mode. Primary poder status red LED. Indicates if AC poder is on or off. All 9 status LEDs visible when cabinet is closed.

2 Señales de alerta para entrada y demora de salida..

Exit delay. A pulsed salida during exit delay.

Entry delay. A constant salida during entry delay.

Patented Automatic Extended Exit Delay (A.E.E.D.):  Opening a switch/sensor connected to an exit delay zone before the exit delay elapses automatically extends the exit delay for as long as the switch/sensor remains open.
Fail-safe circuitry:  Alarm cannot be armed unless all switches and sensores connected to unshunted zones are in their non-violated state.
Phase-II continual protection:  To assure continuous protection, any input that remains triggered after the alarm duration has elapsed will shut down. All other inputs will remain armed.
Multi-remoto arma y desarma con la salida de reporte:  Allows for the installation of up to 10 arming/disarming devices.
Arm/disarm report salida:  Sends 100mA transistor ground signal to indicate alarm is armed or disarmed.
Tamper salida:  Sends a 100mA transistor ground signal for as long as the tamper zone is activated.
Dry relay contact panic salida (C. - N.O.):  Relay contacts close when the panic zone is activated.

Voltaje positivo (3 Amp) salida para el relevador de la alarma.:  Powers signaling devices like a siren, bell, dialer, etc. Works on 16V AC/DC with back-up batería input:  Use with DC adapter or Class-II transformer.  Fuente de poder regulado y recargador. Gabinete para uso pesado en color beige:  Measures 8 1/2" X 3 1/8" X 11 7/16" (215 x 79 x 290 mm). Detachable front cover of steel cabinet. 2 Switches interruptores incluidos:  Detects if steel cabinet front cover opened or cabinet removed from wall.

ENFORCER 295M: PC Board (Module) only para el ENFORCER 295.

Test text = Phil Osborn
test1