 |
The new EVT-PB1-H05Q video, power and data (VPD) balun with voltage booster provides an inexpensive, flexible solution for sending both data and power on CCTV signal lines.
The EVT-PB1-H05Q is a Passive Video Balun with a built-in selectable 12/24 VDC voltage booster. Passive Video Baluns allow a CCTV camera's video signal to be transmitted over low-cost CAT5 unshielded twisted pair (UTP) cable instead of costly coax cable. They are suitable for full-motion color and monochrome cameras and provide a quick, low-cost way to connect CCTV cameras to a monitor, multiplexer, or video recorder at up to 2,000ft (610m) away.**
|
|
|
|
- Video, power, and data (VPD) over Cat5.
- Built-in voltage booster compensates DC voltage drops over long cable runs.
- Input voltage: 7~24 VDC.
- Selectable 12/24VDC output via jumper, plus Vernier adjustment within each setting.
- Transmits video up to 2,000ft (610m) over Cat5.**
- Output current: 500mA@ 12 or 24 VDC.
- Dual-colored LED power output indicator:
Red: 12VDC
Blue: 24VDC
- Green power input LED indicator.
- Built-in overload and short-circuit protection.
- Passive balun operation -- No external power required.
- RoHS compliant.
- Uses low-cost Cat5 cable instead of costly coaxial cables.
- High immunity from interference – Built-in impedance-coupled device and noise filter. Helps to reduce RF interference, cross talk, picture tearing, and other picture quality problems.
- Gold-plated BNC connector for reliability and longer life.
- Built-in multi-color LED indicates power is on and polarity is correct.
- Small size, only 31/4"x29/16"x3/4" (81x65x20 mm), excluding 6” (150mm) cable.
- Patent Pending
|
|
|
|
|
|
Copyright 2008 by SECO-LARM U.S.A., Inc. All rights reserved. Modified:
Supplier of Security Systems and Accessories Worldwide.
