Follow us on:           


Passive Video, Power & Data Balun with Voltage Converter (Discontinued)

Model Number: EVT-PB1-L05Q
The EVT-PB1-L05Q video, power and data (VPD) balun with power converter provides an inexpensive, flexible solution for sending both data and power on CCTV signal lines.

The EVT-PB1-L05Q is a Passive Video Balun with a built-in voltage converter. Passive Video Baluns allow a CCTV camera's video signal to be transmitted over low-cost CAT5 unshielded twisted pair (UTP) cable instead of costly coax cable. Suitable for full-motion color and monochrome cameras, they provide a quick, low-cost way to connect CCTV cameras to a monitor, multiplexer, or video recorder at up to  2,000ft (610m) away.

The EVT-PB1-L05Q Video, Power and Data (VPD) Balun with Voltage Converter combines the flexibility of a VPD Balun with the ability to convert AC or DC voltage for use in low voltage DC applications. The VPD balun with voltage converter changes 12/24VAC/VDC input voltage to a regulated 5/12/24VDC adjustable output voltage. Converted DC power is regulated to provide stable power suitable for voltage  sensitive cameras.  

  • Video, power, and data (VPD) over Cat5
  • Selectable 5/12/24VDC output via jumper
  • Transmits a monochrome video signal up to 2,000ft (610m) or color up to 1,300ft (400m)
  • Passive operation -- No external power required
  • RoHS compliant
  • Uses low-cost Cat5 cable instead of costly coaxial cables
  • Gold-plated BNC connector for reliable longer life
  • High immunity from interference - Built-in impedance-coupled device and noise filter. Helps to reduce RF interference, cross talk, picture tearing, and other picture quality problems
  • Built-in multi-color LED indicates power is on and polarity is correct
  • Small size, only 31/4" x 29/16" x 3/4" (81x65x20 mm),excluding 6" (150mm) cable
  • Patent Pending

*Note: Shorter range may result when baluns are used with DVR.
Max. Range 2,000’ (610m) B/W, 1,300’ Color (400m)
Maximum input 1.0 Vp-p
Insertion loss < 2dB per pair from DC ~ 5 Mhz
Return loss >-15dB from DC ~ 5 Mhz
Common Mode Rejection 60dB, 15KHz~5MHz
Power No power required for video
Wire Type UTP (unshielded twisted pair)
Wire Category 20 - 24 AWG @ screwless terminal blocks, CAT2 or better, CAT5 ideal, CAT6 improves range
Connectors In- Removable terminal block, Out- Pigtail BNC (Video), Pigtail DC plug (center pin positive, Power), Wire (Data)
Impedance Coax, male BNC: 75 Ω@ 1 MHz, Terminal block: 100 Ω @ 1 MHz
Attenuation DC ~ 5 Mhz, 1.5 dB max
Frequency response DC ~ 5 Mhz
Video Format RS170, NTSC, PAL, SECAM, CCIR
Operating Humidity 0 ~ 95%
Operating Temperature 14°~ 165°F (-10°~74°C)
Case ABS Plastic
Dimensions 3-1/4" x 2-9/16" x 3/4" (81 x 65 x 20 mm)