Language

Categories

ENHANCED HDMI Extender over Single Cat5e/6, Range: Up to 330ft (100m) (Discontinued)

Model Number: MVE-AH1H1-02ZQ
The ENFORCER Enhanced HDMI® Extenders over Cat5e/6 extend the range of HDMI® signals to send video and audio up to 330ft (100m)* over a single Cat5e/6 cable. The extender includes an IR transmitter and receiver, allowing the user to use a remote control at one end of an installation to control a device at the opposite end. A single power supply can power both devices from either end of the installation. The MVE-AH1H1-02ZQ also supports 100BaseT Ethernet Pass-through and Bi-directional RS-232 control.
  • Supports resolutions from 480i up to 4Kx2K/UHD
  • Plug and play operation – comes as a complete set
  • Bi-directional IR for remote control extension
  • Includes one (1) 24VDC locking power supply – set can be powered at either end
  • 100BaseT Ethernet pass-through
  • Bi-directional RS-232 pass-through
  • Signal Strength – Active operation ensures that the signal strength will remain strong over the length of the cable
  • Distance – The Enhanced HDMI® Extender over Cat5e/6 can transmit a clear HDMI® signal up to 330ft (100m) for the MVE-AH1H1-02ZQ
  • Formats Supported – The Enhanced HDMI® Extender over Cat5e/6 supports both progressive and interlaced formats: 4K/1080p/1080i/720p/576p/576i/480p/480i
  • Plug and Play – The Enhanced HDMI® Extender over Cat5e/6 comes as a complete set consisting of a transmitter, receiver, power supply, and IR adapters
  • Zero Signal Loss – Integrated circuits in the transmitter and receiver clean, buffer, and amplify the HDMI® signal
  • Bi-Directional IR – Send IR signals from the source to the monitor or from the monitor to the source for discrete operation of devices
  • Connect Multiple Units – Repeat up to four sets to extend HDMI® range up to 1300ft (400m) for the MVE-AH1H1-02ZQ
  • Bi-Directional RS-232 – Send RS-232 commands from a control system to the display and back without extra cabling
  • Ethernet pass-through – 100BaseT Ethernet pass-through to connect remote displays to local networks
Input Video Signal 3.3V
Input DDC Signal 5Vp-p (TTL)
Deep Color 48-Bit
Video Format Supported High-speed HDMI® with 3D, HDCP 1.2
Audio Formats Supported LPCM, Dolby-AC3, DTS 7.1, DSD
Output Video HDMI®
Resolutions Supported 4K/1080p/1080i/720p/576p/576i/480p/480i
Range - 1080p Cat6- Up to 330’ (100m), Cat5e- Up to 295’ (90m)
Range - 4K Cat6- Up to 230’ (70m), Cat5e- Up to 196’ (60m)
Video Amplifier Bandwidth 10.2Gbps
Maximum Input Cable Length 24AWG: 50' (15m); 26AWG: 32' (10m); 28AWG: 16' (5m)
Video Input Connector HDMI® Type A 19-pin female
Ethernet Pass-Through 100BaseT
IR Pass-Through 30~50kHz
Operating Voltage 24VDC
RS-232 Pass-Through 115,200 baud
Power Supply 1A@24VDC (1 adapter) (2.1mm plug)
ESD Protection (Human Body Model) ±8kV (air-gap discharge), ±4kV (contact discharge)
Cat5e/6 Wiring Standard T568-B
Current Draw Transmitter- 150mA@24VDC, Receiver- 250mA@24VDC
Operating Temperature 32°~104° F (0°~40° C)
Operating Humidity 20~90% RH (no condensation)
Dimensions 3-15/16” x 3-15/16” x 1-1/8” (100 x 100 x 28 mm)
Weight 11.3-oz (300g) (each)
Maximum Single Link Range 4Kx2K@30Hz
Tags: 1080p