Controls home automation functions, garage doors, alarm panels, etc., from up to 500 ft. Similar to SK-910RAV except with 16 RF outputs, independently programmable. Compatible with all SECO-LARM transmitters. Mode switch for easy programming. LEDs indicate RF reception, learn mode, transmitter cleared, output type. Add optional plug-in extended range antenna: SK-91ERSD
- Use to control home automation functions, garage door openers, house lights, alarm control panels, motorized gates, lifts or other devices by remote control.
- Patented CODEBUMP™ anti-codegrabbing technology (requires use of CODEBUMP transmitter).
- Uses either fixed code (SK-919TD2A-U, SK-919TD1S-U, SK-919T4J, SK-919T1H, SK-919T2H, or SK-919T4H) or code hopping (SK-917T2A-U, or SK-917T4J) transmitters with up to 500 ft. range using standard antenna.
- External extended range antenna optional. Plugs directly into receiver PC Board. If SECO-LARM SK-91ERSD (Dipole Antenna) is used, range will be up to 1200 feet.
- Mode switch for easy transmitter learning.
- Easily Code-learns up to 15 remotes per channel.
- Stores codes safely in EEPROM for up to one year in case of power loss.
- Sixteen transistor ground outputs. Each output rated 5 Amps at 12 VDC.
- 16 Separate Channels / 4 Output Modes Each:
- a. Timed Momentary (1, 2, 3, 4, 5, 10, 30, 60 sec.)
- b. Toggle (On/Off)
- c. Latch (Output stays on until manually reset)
- d. Continuous or Validity (Output for as long as signal is received)
- All outputs are independently controlled. (i.e. Channel 1 can be toggle, Channel 2 can be one second momentary, etc.)
Note: If the timed momentary output is chosen for any channel, there will be only one time available for all channels. In other words, if a one-second output time is selected for one channel, then all other timed momentary outputs will be one second.
Size: 5.31" x 4.33" x 1.1" (135 x 110 x 28 mm)
- LEDs indicate RF reception, learn mode entered, transmitted learned, memory cleared.
- Use to control the garage door, house lights, alarm control panel, or other functions that require momentary or shunt operation.
- In addition, these revolutionary receivers have:
- Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals.
- HIGHER SENSITIVITY for greater operating distances.
- UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted.
- GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration.
|
CODEBUMP™ Technology
Be prepared for today's thieves with SECO-LARM's patented CODEBUMP™ technology. With CODEBUMP, so-called "code-grabbers" and "scanners" are rendered obsolete because the RF code changes every time the transmitter button is pressed. In addition, with over 18 quintillion (1.8 x 1019) codes, the chances of ever repeating a code are virtually non-existent. SECO-LARM's CODEBUMP transmitters and receivers are perfect for controlling garage and gate openers, car and home alarms, plus much more.
|
View Enlargement
|
