ENFORCER Single-Channel RF Transmitters & Receiver

Single-Channel RF Transmitter & Receiver Sets*

Transmitters (Choose any transmitter)
SK-919TD1S-UP 1-Button, 1-Channel, Fixed-Code, Pre-coded
SK-919TT1S-BU 1-Button, 1-Channel, DIP switch coded - see Product Info Sheet
SK-919TDWS-BU Pre-Wired, 1-Button, 1-Channel, Fixed-Code, Pre-coded - See Page.
SK-919TP1H-B 1-Button, 1-Channel, Fixed-Code, Handheld
Receivers
SK-910RQ, SK-910RL (discontinued), SK-910RV (discontinued), SK-910RA, SK-910RAV 1-Channel RF Receivers

*	Note: all current SECO-LARM transmitters and receivers are mutually compatible, meaning that they will work with each other, except for the remaining older 3-button models.

Descriptions

SK-919TD1S, SK-919TT1S-BU
1-CHANNEL TRANSMITTER

Frequency 315MHz (433.92MHz also available by request).
Operates up to 500ft (150m).*
Over 68 billion (6.8x10¹⁰) possible codes.
Sleek new case with flashing LED transmission indicator.
Includes 12VDC alkaline battery with handsome key chain ring.
Compatible with SK-910RQ, SK-910R2Q, and SK-910R4Q.
Size: 2¹/₄"x1¹/₂"x⁵/₈" (57x38x16 mm).
SK-919TT1S-BU uses DIP switch coding. Perfect for applications requiring large numbers of identical codes.
Private label available. Contact SECO-LARM for details.

SK-919TP1H-B
1-BUTTON, 1-CHANNEL HAND-HELD SLIMLINE RF TRANSMITTER

Extreme Durability - Rubber buttons eliminate damage caused by electrostatic discharge and helps make transmitter weatherproof. Gold-plated battery clips and contact points extend the life of the transmitter.
Magic LED Only appears when buttons are pressed.
Frequency 315MHz (433.92MHz also available by request).
Over 68 billion (6.8x10¹⁰) possible codes.
Operates up to 500ft (150m).*
RF anti-scan protection.
Compatible with all SECO-LARM receivers (SK-910RQ, SK-910R2Q, SK-910R4Q).
Includes 2 3VDC lithium batteries and visor clip.
Two and four-button hand-held also available.
CODEBUMP™ models also available with 18 quintillion possible codes.
Size: 3¹/₂"x2³/₁₆"x¹/₂" (89x56x12 mm).
Private label available.

SK-910RQ
1-CHANNEL RF RECEIVERS

Compatible with either the SK-919TD1S or SK-919TD2A transmitters.
Use to control garage door opener, house lights, alarm control panel, or other devices via remote control.
SK-910RQ: FORM-C dry relay contact (NO/NC/COM) output. Rated 10 Amps at 24 VDC.
Frequency 315MHz (433.92MHz also available by request).
This revolutionary receiver incorporates:
--1. Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals.
--2.HIGHER SENSITIVITY for greater operating distances.
--3.UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted.
--4.GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration.
LED indicates RF reception, learn mode entered, transmitter learned, memory cleared.
Mode switch for easy transmitter learning.
Learns up to 15 transmitters.
4 Output modes (programmable): 4-Second momentary, 1-Second momentary, Toggle, Latch.
Screw terminals for simple connection.
Size: 3¹/₄"x3³/₈"x1¹/₈" (83x85x28 mm).

Specifications

Operating Frequency	315MHz (433.92MHz also available by request)
Operating Voltage	SK-910RQ 11-24VAC/VDC
Operating Distance	Up to 500' (150m)*
Operating Temperature	-4º~162º F (-20º~72º C)
Current Drain	15mA at 12VDC (LED flashing)
Current Drain	45mA at 12VDC (activated)
Sensitivity	-87dBm (typical)
Data Format	PWM
RF Codes	18 Quintillion ( SK-917T2A-U, SK-917TP4J-N) 68 billion (SK-919TD1S, SK-919TD2A, SK919TDWS-BU, SK-919TP4J-N, SK-919TPIH-N, SK-919TP2H-N, SK-919TP4H-N)
RF Channels	One
Number of Stored Transmitter Codes	Up to 15
Receiver Outputs	SK-910RQ: Form C dry relay contact (NO/NC/COM); max 10 Amp at 24VDC
Receiver Output Modes	Programmable 4-sec. momentary (default), 1-sec. momentary, toggle or latch
Connectors	5 Quick-connect screw terminals (+, -, with NO/NC/COM)
Case Construction	High-impact ABS plastic
Size	3¹/₄"x3³/₈"x1¹/₈" (83x85x28 mm)
Weight	2.6-oz (74g)
Approvals	FCC

Operation

Mode switch
Enter Learn Mode	Press and hold mode switch for 3 seconds. LED will flash fast.
Learn Transmitter Code	Within 15 seconds of entering learn mode press transmitter button. LED will flash 1 time when transmitter learned.
Clear Memory	After entering learn mode, again press and hold the switch for 3 seconds. LED will flash twice to indicate memory clear.
Reset Latched Output	Press mode switch momentarily and release.
LED Indicator
Steady ON	RF reception (receiver is receiving RF signal from coded transmitter -- great for trouble shooting).
Fast Flash	In code-learning mode.
One Flash	A transmitter code is learned.
Two Flashes	All learned codes are cleared.

*Actual antenna range will vary greatly depending on the installation and operating environment.

Patented CODEBUMP™ Technology

Be prepared for today's thieves with SECO-LARM's patented CODEBUMP technology. With CODEBUMP, so-called code-grabbers and scanners are rendered obsolete because the RF code changes every time the transmitter button is pressed. In addition, with over 18 quintillion (1.8x10¹⁹) codes, the chances of ever repeating a code are virtually non-existent. SECO-LARM's CODEBUMP transmitters and receivers are perfect for controlling garage and gate openers, car and home alarms, plus much more.