• RF CODEBUMP™ anti-codegrabbing technology.
• Frequency 315 MHz (433.92 Mhz also available by request).
• Operates up to 500 feet.
• 18 Quintillion (1.8 x 10¹⁹) possible codes.
• Sleek new case with flashing LED transmission indicator.
• Includes 12VDC alkaline battery with handsome key chain ring.
• Compatible with SK-910R, SK-910R2, and SK-910R4 SECO-LARM receivers.
• Size: 2¹/₄" x 1¹/₄" x ¹/₂" (57 x 32 x 12mm).
• Private label available. Contact SECO-LARM for details.

• Frequency 315 MHz (433.92 Mhz also available by request).
• Operates up to 500 feet (200 meters).
• Over 68 billion possible codes.
• Sleek new case with flashing LED transmission indicator.
• Compatible with SK-910R, SK-910R2, and SK-910R4 SECO-LARM receivers.
• Size: 2¹/₄" x 1¹/₄" x ¹/₂" (57 x 32 x 12mm).
• Includes 12VDC alkaline battery with handsome key chain ring.

• Extreme Durability - Rubber buttons eliminate damage caused by electrostatic discharge and helps make transmitter water resistant. Gold-plated battery clips and contact points extend the life of the transmitter.
• Magic LED Only appears when buttons are pressed.
• Frequency 315 MHz (433.92 MHz also available by request).
• Over 68 billion (6.8 x 10¹⁰) possible codes.
• Operates up to 500 feet (150 meters).
• RF anti-scan protection.
• Compatible with SK-910R, SK-910R2, and SK-910R4 SECO-LARM receivers.
• Includes two 3VDC lithium batteries and visor clip.
• One and four-button hand-held also available.
• CODEBUMP™ models also available with 18 quintillion possible codes.
• Size: 3¹/₂" x 2³/₁₆" x ¹/₂" (89 x 56 x 12mm).
• Private label available.

Be prepared for today's thieves with SECO-LARM's patented CODEBUMP™ technology. With CODEBUMP, so-called code-grabbers and scanners are rendered obsolete because the RF code changes every time the transmitter button is pressed. In addition, with over 18 quintillion (1.8 x 10¹⁹) codes, the chances of ever repeating a code are virtually non-existent. SECO-LARM's CODEBUMP transmitters and receivers are perfect for controlling garage and gate openers, car and home alarms, plus much more.

• Compatible with either SK-917T2A (CODEBUMP™) or SK-919TD2A (fixed code) transmitters.
• Use to control garage door opener, house lights, alarm control panel, or other devices via remote control.
• Two FORM-C dry relay contact (N.O./N.C./COMMON) outputs. Rated 10 Amps at 24 VDC.
• This revolutionary receiver incorporates:
  --1. Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals.
  --2.HIGHER SENSITIVITY for greater operating distances.
  --3.UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted.
  --4.GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration.
• Frequency 315MHz.
• 2 LEDs (one for each channel) indicate RF reception, learn mode entered, transmitter learned, memory cleared.
• 2 Mode switches (one for each channel) for easy transmitter learning.
• Learns up to 30 transmitters (15 for each receiver channel).
• 4 Output modes (programmable): 4-Second momentary, 1-Second momentary, Toggle, Latch.
• Screw terminals for simple connection.
• Size: 3¹/₄" x 3³/₈" x 1¹/₈" (83 x 85 x 28mm).

Specifications

Operating Frequency: 315MHz (433.92 MHz also available by request) Operating Voltage: 11 to 24VAC/VDC Operating Distance: Up to 650 feet (open air) Operating Temperature: -20º C to 72º C, -4º F to 162º F Current Drain: 8mA at 12VDC (standby) 60 mA per channel at 12 VDC (activated) Sensitivity: -87dBm (typical) Data Format: PWM RF Codes: 18 quintillion (SK-917T2A) 68 billion (SK-919TD2A) RF Channels: Two Number of Stored Transmitter Codes: 15 per channel, 30 per receiver Receiver Outputs: Two form "C" dry relay contacts (N.O./N.C./Common); 10 Amps at 24VDC Receiver Output Modes: Programmable 4-sec. momentary (default), 1-sec. momentary, toggle or latch Connectors: 8 Quick-connect screw terminals (+, -, with N.O./N.C./Common for channel 1 and N.O./N.C./Common for channel 2) Case Construction: High-impact ABS plastic Size: 3.25" x 2.7" x 1.1" (83 x 68 x 27.5mm) Weight: 4.1 oz. (116gm.) Approvals: FCC

Operation

Mode switch (one per channel): Enter Learn Mode: Press and hold mode switch for 3 seconds. LED will flash fast. Learn Transmitter Code: Within 15 seconds of entering learn mode press transmitter button. LED will flash 1 time when button learned. Clear Memory: After entering learn mode, again press and hold the switch for 3 seconds. LED will flash twice to indicate memory clear. Reset Latched Output: Press mode switch momentarily and release. LED Indicator (one per channel): Steady ON: RF reception (receiver is receiving RF signal from coded transmitter -- great for trouble shooting). Fast Flash: In code-learning mode. One Flash: A transmitter code is learned. Two Flashes: All learned codes are cleared.