SK-917T2A-U
TWO-BUTTON RF CODEBUMP TRANSMITTER
- RF CODEBUMP anti-codegrabbing technology.
- Frequency 315MHz (433.92MHz also available by request).
- Operates up to 500ft (150m).*
- 18 Quintillion (1.8x1019) possible codes.
- Sleek new case with flashing LED transmission indicator.
- Includes 12VDC alkaline battery with handsome key chain ring.
- Compatible with SK-910RQ, SK-910R2Q, and SK-910R4Q SECO-LARM receivers.
- Size: 21/4"x11/4"x1/2" (57x32x12 mm).
- Private label available. Contact SECO-LARM for details.
SECO-LARM PATENTED CODEBUMP
With SECO-LARM's Patented Anti-CodeGrabbing technology the transmitter's code changes every time the transmitter button is pressed. This prevents the electronic theft of the code. |
SK-919TD2A-U
TWO-BUTTON RF TRANSMITTER
- Frequency 315MHz (433.92MHz also available by request).
- Operates up to 500ft (150m).*
- Over 68 billion possible codes.
- Sleek new case with flashing LED transmission indicator.
- Compatible with SK-910RQ, SK-910R2Q, and SK-910R4Q SECO-LARM receivers.
- Size: 21/4"x11/4"x1/2" (57x32x12 mm).
- Includes 12VDC alkaline battery with handsome key chain ring.
SK-919TP2H-N
2-BUTTON, 3-CHANNEL HAND-HELD SLIMLINE RF TRANSMITTER
- Extreme Durability - Rubber buttons eliminate damage caused by electrostatic discharge and helps make transmitter water resistant. Gold-plated battery clips and contact points extend the life of the transmitter.
- Magic LED Only appears when buttons are pressed.
- Frequency 315MHz (433.92MHz also available by request).
- Over 68 billion (6.8x1010) possible codes.
- Operates up to 500ft (150m).*
- RF anti-scan protection.
- Compatible with SK-910RQ, SK-910R2Q, and SK-910R4Q SECO-LARM receivers.
- Includes two 3VDC lithium batteries and visor clip.
- One and four-button hand-held also available.
- CODEBUMP models also available with 18 quintillion possible codes.
- Size: 31/2"x23/16"x1/2" (89x56x12 mm).
- Private label available.
Patented CODEBUMP Technology
Be prepared for today's thieves with SECO-LARM's patented CODEBUMP technology. With CODEBUMP, so-called code-grabbers and scanners are rendered obsolete because the RF code changes every time the transmitter button is pressed. In addition, with over 18 quintillion (1.8x1019) codes, the chances of ever repeating a code are virtually non-existent. SECO-LARM's CODEBUMP transmitters and receivers are perfect for controlling garage and gate openers, car and home alarms, plus much more.
SK-910R2Q
TWO-CHANNEL RF RECEIVER
- Compatible with either SK-917T2A (CODEBUMP) or SK-919TD2A (fixed code) transmitters.
- Use to control garage door opener, house lights, alarm control panel, or other devices via remote control.
- Two FORM-C dry relay contact (NO/NC/COM) outputs. Rated 10 Amps at 24 VDC.
- This revolutionary receiver incorporates:
--1. Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals.
--2.HIGHER SENSITIVITY for greater operating distances.
--3.UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted.
--4.GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration.
- Frequency 315MHz.
- 2 LEDs (one for each channel) indicate RF reception, learn mode entered, transmitter learned, memory cleared.
- 2 Mode switches (one for each channel) for easy transmitter learning.
- Learns up to 30 transmitters (15 for each receiver channel).
- 4 Output modes (programmable): 4-Second momentary, 1-Second momentary, Toggle, Latch.
- Screw terminals for simple connection.
- Size: 31/4"x33/8"x11/8" (83x85x28 mm).
Low voltage receivers available: 3VDC & 6VDC. Contact SECO-LARM.
|