ENFORCER Three-Channel RF Transmitters & Receiver

3-Channel Code-Hopping RF Transmitter & Receiver Set

SK-916T3A 3-Button, 6-Channel RF Transmitter
SK-916RSM3 3-Button, 6-Channel RF Receiver

Descriptions

SK-916T3A
Three-Button CODEBUMP™ Anti-Codegrabbing RF Transmitter

Frequency 315 MHz. Variable capacitance controlled.
Operates up to 200 feet (60 meters).
RF anti-scan protection. 18 quintillion possible codes.
Use with SK-916RSM3.
Includes 12VDC alkaline battery with handsome key chain ring.
Private label available. Contact SECO-LARM for details.

Patented CODEBUMP™ Technology
Be prepared for today's thieves with SECO-LARM's patented CODEBUMP™ technology. With CODEBUMP, so-called code-grabbers and scanners are rendered obsolete because the RF code changes every time the transmitter button is pressed. In addition, with over 18 quintillion (1.8 x 10¹⁹) codes, the chances of ever repeating a code are virtually non-existent. SECO-LARM's CODEBUMP transmitters and receivers are perfect for controlling garage and gate openers, car and home alarms, plus much more.

SK-916RSM3
Three-Channel CODEBUMP™ Code-Hopping RF Receiver (Shunt/Momentary Operation)

Patented CODEBUMP™ anti-codegrabbing technology.
Uses SK-916T3A transmitter (up to 200 ft. range).
Tact switch for easy transmitter learning.
Easily Code-learns up to 5 remotes.
Stores codes safely in EEPROM for up to one year in case of power loss.
Wire leads for easy connection.
One channel programmable for shunt or momentary operation, 2 channels are momentary operation.
Two built-in Form-C dry relay contact (N.O./N.C./Common) outputs, max. 2 Amps. at 24VDC.
One LED for each channel to indicate when receiver receives signal from transmitter.
Use to control the garage door, house lights, alarm control panel, or other functions that require momentary or shunt operation.
In addition, these revolutionary receivers have:
1. Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals.
2. HIGHER SENSITIVITY for greater operating distances.
3. UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted.
4. GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration.

Specifications

Operating Frequency:	315MHz
Operating Voltage:	9.6 to 14.4VDC
Operating Distance:	Up to 200 feet (open air)
Operating Temperature:	-40ºC ~ 75ºC, -40ºF ~ 167ºF
Current Drain:	8mA at 12VDC (standby)
Current Drain:	60mA at 12VDC (Channel 1 or 2, activated) 20mA at 12VDC (Channel 3, activated)
Sensitivity:	-87dBm (typical)
Data Format:	PWM
RF Codes:	18 quintillion
RF Channels:	Three
Number of Stored Transmitter Codes:	5
Receiver Outputs:	Two form "C" dry relay contacts (N.O./N.C./Common); 2 Amps (Channel 1 or 2); 200mA TR GND O/P (Channel 3)
Receiver Output Modes:	Channel 1: Momentary or shunt Channel 2 or 3: Momentary
Connectors:	8 Pin wire harness and Channel 3 wire
Case Construction:	High-impact ABS plastic
Size:	3.25" x 2.7" x 1.1" (83 x 68 x 27.5mm)
Weight:	3.5 oz. (100gm.)

Operation

Mode switch (one per channel):
Enter Learn Mode:	Press tact switch.
Learn Transmitter Code:	Within 15 seconds of entering learn mode press button 1 and hold for 3 seconds.
LED Indicator (one per channel):
Steady ON:	Red - Channel 1 Green - Channel 2 Yellow - Channel 3
Once button 1 (channel 1) is learned, button 2 (channel 2), and button 3 (channel 3) are also automatically learned.

Small linked photo of three-channel RF transmitter and receiver set

View Enlargement

Small linked diagram of three-channel RF hookup

View Enlargement

Product Info Sheet