Single-Channel RF Transmitters & Receivers SK-919TD1S
SK-910R, SK-910RL, SK-910RV
  Descriptions

SK-919TD1S
ONE-CHANNEL TRANSMITTER

  • Frequency 315 MHz.
  • Operates up to 650 feet.
  • Over 68 billion (6.8 x 1010) possible codes.
  • Sleek new case with flashing LED transmission indicator.
  • Includes 12VDC alkaline battery with handsome key chain ring.
  • Compatible with SK-910R and SK-910R2.
  • Private label available. Contact SECO-LARM for details.

SK-910R, SK-910RL, SK-910RV
ONE-CHANNEL RF RECEIVERS

  • Compatible with either the SK-919TD1S or SK-919TD2A transmitters.
  • Use to control garage door opener, house lights, alarm control panel, or other devices via remote control.
  • SK-910R and SK-910RL: FORM-C dry relay contact (N.O./N.C./COMMON) output. Rated 10 Amps at 24 VDC.
    SK-910RV: Transistor ground output.
  • Frequency 315MHz.
  • This revolutionary receiver incorporates:
    --1. Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals.
    --2.HIGHER SENSITIVITY for greater operating distances.
    --3.UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted.
    --4.GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration.
  • LED indicates RF reception, learn mode entered, transmitter learned, memory cleared.
  • Mode switch for easy transmitter learning.
  • Learns up to 15 transmitters.
  • 4 Output modes (programmable): 4-Second momentary, 1-Second momentary, Toggle, Latch.
  • Screw terminals for simple connection.
Specifications
Operating Frequency 315MHz
Operating Voltage SK-910R: 11-24VAC/VDC
SK-910RL: 6VDC
SK-910RV: 3-12VDC
Operating Distance Up to 650 feet (open air)
Operating Temperature -20ºC ~ 72ºC, -4ºF ~ 162ºF
Current Drain 15mA at 12VDC (LED flashing)
45mA at 12VDC (activated)
Sensitivity -87dBm (typical)
Data Format PWM
RF Codes 68 billion (SK-919TD1S)
RF Channels One
Number of Stored Transmitter Codes Up to 15
Receiver Outputs SK-910R and SK-910RL: Form C dry relay contact (N.O./N.C./Common); max 10 Amp at 24VDC
SK-910RV: Transistor ground output
Receiver Output Modes Programmable 4-sec. momentary (default), 1-sec. momentary, toggle or latch
Connectors 5 Quick-connect screw terminals (+, -, with N.O./N.C./Common)
Case Construction High-impact ABS plastic
Size 3.25" x 2.7" x 1.1" (83 x 68 x 27.5mm)
Weight 2.6 oz. (74gm.)
Approvals FCC


Operation
Mode switch
Enter Learn Mode Press and hold mode switch for 3 seconds. LED will flash fast.
Learn Transmitter Code Within 15 seconds of entering learn mode press transmitter button. LED will flash 1 time when button learned.
Clear Memory After entering learn mode, again press and hold the switch for 3 seconds. LED will flash twice to indicate memory clear.
Reset Latched Output Press mode switch momentarily and release.
LED Indicator
Steady ON RF reception (receiver is receiving RF signal from coded transmitter -- great for trouble shooting).
Fast Flash In code-learning mode.
One Flash A transmitter code is learned.
Two Flashes All learned codes are cleared.
Small linked photo of one-channel RF transmitter
View Enlargement


Small linked photo of one-channel RF receiver
View Enlargement

Product Info Sheet
Installation Manual
Copyright 2006 by SECO-LARM U.S.A., Inc. All rights reserved. Modified:
Manufacturer and Distributor of Vehicle Security Systems and Accessories Worldwide.