|
SK-917T2A
2-CHANNEL RF CODEBUMP™ TRANSMITTER
- RF CODEBUMP™ anti-codegrabbing technology.
- Frequency 315MHz.
- Operates up to 650ft (200m).
- 18 Quintillion (1.8x1019) possible codes.
- Sleek new case with flashing LED transmission indicator.
- Includes 12VDC alkaline battery with handsome key chain ring.
- Compatible with SK-910R2Q.
- Private label available. Contact SECO-LARM for details.
SECO-LARM PATENTED CODEBUMP™
With SECO-LARM's Patented Anti-CodeGrabbing technology the transmitter's code changes every time the transmitter button is pressed. This prevents the electronic theft of the code. | SK-919TD2A
TWO-CHANNEL RF TRANSMITTER
- Frequency 315MHz.
- Variable capacitance controlled.
- Operates up to 650ft (200m).
- Over 68 billion possible codes.
- Sleek new case with flashing LED transmission indicator.
- Compatible with SK-910R2Q.
- Includes 12VDC alkaline battery with handsome key chain ring.
SK-910R2Q
TWO-CHANNEL RF RECEIVER
- Compatible with either SK-917T2A (CODEBUMP™) or SK-919TD2A
(fixed code) transmitters.
- Use to control garage door opener, house lights, alarm control panel, or other devices via remote control.
- Two FORM-C dry relay contact (NO/NC/COM) outputs. Rated 10 Amps at 24 VDC.
- Frequency 315MHz.
- This revolutionary receiver incorporates:
--1. Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals.
--2.HIGHER SENSITIVITY for greater operating distances.
--3.UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted.
--4.GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration.
- 2 LEDs (one for each channel) indicate RF reception, learn mode entered, transmitter learned, memory cleared.
- 2 Mode switches (one for each channel) for easy transmitter learning.
- Learns up to 30 transmitters (15 for each receiver channel).
- 4 Output modes (programmable): 4-Second momentary, 1-Second momentary, Toggle, Latch.
- Screw terminals for simple connection.
Be prepared for today's thieves with SECO-LARM's patented CODEBUMP™ technology. With CODEBUMP™, so-called "code-grabbers" and "scanners" are rendered obsolete because the RF code changes every time the transmitter button is pressed. In addition, with over 18 quintillion (1.8x1019) codes, the chances of ever repeating a code are virtually non-existent. SECO-LARM's CODEBUMP™ transmitters and receivers are perfect for controlling garage and gate openers, car and home alarms, plus much more. |
