SD-9163-KS2Q

Outdoor Wave-to-Open Sensor – Slimline – French

The ENFORCER Outdoor Wave-to-Open Sensor is a full-featured exit plate which uses IR technology to allow egress from a protected area or activate a device with the simple wave of a hand. Since no touch is required, this sensor is suitable for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.

  • product_icon
  • product_icon
  • product_icon

  • ETL, Conforms to UL Std. 294
  • Adjustable sensor range up to 7″ (18cm)
  • Weatherproof (IP65) for outdoor use*
  • Stainless steel plate
  • 1.2A relay, adjustable trigger duration 0.8~30 seconds or toggle
  • LED illuminated sensor area for easy identification
  • Selectable LED colors (turns from red to green or green to red) to show sensor activate

​*When properly installed

 

Operating temperature 12~24 VDC
Current draw (max. ±10%) Standby red (12/24 VDC): 13mA / 15mA
Triggered green (12/24 VDC): 21mA / 25mA
Standby green (12/24 VDC): 12mA / 14mA
Triggered red (12/24 VDC):  23mA / 28mA
Relay type SPDT dry contact, 1.2A@24VDC
Response time 10ms
LED Standby: Red*
Triggered: Green*
Ouput duration 0.8~30 s, toggle
Range 2″~7″ (5~18 cm)
Destructive attack level Level I
Line security Level I
Endurance level Level IV
Standby power Level I
IP Rating Weatherproof, IP65
Operating Temperature -4°~131° F (-20°~55° C)
Dimensions 1-1/2″ x4-1/2″(39 x115 mm)
Weight 2.2-oz (61g)

*Color function reversible †When properly installed

Product information Sheet (PI)

Manual

Advertisement

Sensor is triggering unintentionally.
  • ENFORCER Outdoor Wave-to-Open Sensors can be used either indoors or outdoors. However, due to infrared technology limitations, it is recommended that a hood or shield be used when installing outdoors to shield the sensor from direct light (sunlight, reflections from shiny objects, etc.). Direct light may cause the sensor to trigger unintentionally.
Scroll to Top