Language

Follow us on:           

Categories

Outdoor Wave-to-Open Sensor – Single-Gang – French

Model Number: SD-9263-KS2Q

The ENFORCER Outdoor Wave-to-Open Sensor is a full-featured exit plate which uses IR technology to allow egress from a protected area or activate a device with the simple wave of a hand. Since no touch is required, this sensor is suitable for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.

  • Adjustable sensor range up to 7" (18cm)
  • Weatherproof (IP65) for outdoor use*
  • Stainless steel plate
  • 1.2A relay, adjustable trigger duration
  • 0.8~30 seconds or toggle
  • LED illuminated sensor area for easy identification
  • Selectable LED colors (turns from red to green or green to red) to show sensor activated
​*when properly installed

 
Type "Wave-to-Open" Request-to-Exit Plates with Adjustable Delay Timer, for Outdoor Use
Current Draw Standby- 16mA@12VDC / 25mA@24VDC, Triggered- 20mA@12VDC / 32mA@24VDC
Sensing Range 2"~7" (5~18cm)
Operating Voltage 12~24 VDC
Reaction time 10mS
LEDs - Red Standby (Colors are reversible.)
LEDs - Green Triggered (Colors are reversible.)
Relay Type Form C dry contact
Output Time 0.5~20 s, toggle
Switching Capacity 1.2A@24VDC
Operating Temperature -4°~131° F (-20°~55° C)
Dimensions 4-1/2" x 2-3/4" x 1-1/2" (115 x 70 x 39 mm)
Weight 108g
Enclosure IP65