"No Touch" RTE Plate with Adjustable Delay Timer, for Outdoor Use - Single Gang
Model Number: SD-9263-KSQ
ENFORCER "No Touch" Request-To-Exit Plates use IR technology to request egress from a protected area or to activate a device with the simple wave of a hand. Since they require no touch, these plates are ideal for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.
ENFORCER "No Touch" Request-To-Exit Plates use IR technology to request egress from a protected area or to activate a device with the simple wave of a hand. Since they require no touch, these plates are ideal for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.
- Weather-resistant (IP65) for
outdoor use - Clean and simple no-touch operation reduces the risk of
cross-contamination - Adjustable sensor range up to
7" (18cm) - Stainless-steel plate, available in slimline
or single-gang - 1A relay, adjustable trigger duration
0.8~30 seconds - Selectable LED colors (turns from red to green or green to red) to show if the sensor
is activated
Type | "No Touch" Request-to-Exit Plates with Adjustable Delay Timer, for Outdoor Use |
Current Draw | Standby- 16mA@12VDC / 25mA@24VDC, Triggered- 25mA@12VDC / 32mA@24VDC |
Sensing Range | 2"~7" (5~18cm) |
Operating Voltage | 12~24 VDC |
Reaction time | 10mS |
LEDs - Red | Standby (Colors are reversible.) |
LEDs - Green | Triggered (Colors are reversible.) |
Relay Type | Form C dry contact 1.2A@24VDC |
Output Time | 0.5~30 s, toggle |
Operating Temperature | -4°~131° F (-20°~55° C) |
Dimensions | 4-1/2" x 2-3/4" x 1-1/2" (115 x 70 x 39 mm) |
Weight | 108g |
Enclosure | IP65 |
Follow us on: