Follow us on:           


"No Touch" RTE IR Sensor Wall Plates - White plate

Model Number: SD-927PWCQ
Similar to SD-927PKC-NEQ, but white decor case.

The ENFORCER "No Touch" Request-To-Exit Sensor Plates use IR technology to request egress from a protected area or activate a device with the simple wave of a hand. Since it requires no touch, this wall plate sensor is ideal for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.

  • No Touch -- just wave a hand in front of sensor
  • Sensing range for SD-927PWCQ is up to  2" (5 cm). All others up to 4" (10cm)
  • Reliable IR technology senses motion
  • No touch reduces the risk of cross-contamination
  • White plastic single gang plate
  • 3A relay, triggers min. 0.5 sec. or as long as hand is near the sensor
  • LED illuminated sensor area for easy identification
  • LED changes color to show the relay is triggered
  • Quick-connect screwless terminal block
Type No Touch Request-to-Exit Sensor Wall Plates
Current Draw 50mA@12VDC
Sensing Range Up to 2" (5cm)
Operating Voltage 12VDC
Reaction time 10mS
LEDs - Red Standby
LEDs - Green Triggered
Relay Type Form C (NO/NC/COM) 3A@12VDC
Output Time 0.5S or as long as unit is triggered
Switching Capacity 3A@24VDC
Operating Temperature -4°~131° F (-20°~55° C)
Dimensions 4-1/2" x 2-3/4" x 1-5/16" (115 x 70 x 33.5 mm)
Weight 2.5oz (70g)