Follow us on:           


Outdoor Double-Gang Wave-to-Open Sensor with Manual Override

Model Number: SD-9463-KSVQ
The ENFORCER Outdoor Double-Gang Wave-to-Open Sensor with Manual Override is a full-featured exit plate using IR technology to allow egress from a protected area or activate a device with a simple wave of a hand. Since no touch is required, it is suitable for use in hospitals, clinics, labs, cleanrooms, schools, factories, or offices. The manual override button allows operation during a power failure.
  • Clean and simple no-touch operation reduces the risk of cross-contamination
  • Adjustable sensor range up to 7" (18cm)
  • Weatherproof (IP65) for outdoor use†
  • 1.2A Relay, adjustable duration 0.8~30 seconds or toggle
  • Manual override button functions during a power failure
  • LED-illuminated sensor area for easy identification
  • Selectable LED colors (turns from red to green or green to red) on sensor activation
  • Stainless steel plate
Frequently Asked Question (FAQ)

​Click here for a full line of Touchless Solutions
Type "Wave-to-Open" Request-to-Exit Plates with Adjustable Delay Timer, for Outdoor Use
Current Draw Standby- 16mA@12VDC / 25mA@24VDC, Triggered- 25mA@12VDC / 32mA@24VDC
Sensing Range 2"~7" (5~18cm)
Operating Voltage 12~24 VDC
Reaction time 10mS
LEDs - Red Standby (Colors are reversible.)
LEDs - Green Triggered (Colors are reversible.)
Relay Type Form C dry contact 1A@30VDC
Output Time 0.5~30 s, toggle
Switching Capacity 1.2A@24VDC
Operating Temperature -4°~131° F (-20°~55° C)
Dimensions 5-1/2" x 4-1/2" x 1-1/2" (140 x 114 x 39 mm)
Weight 5.6-oz (160g)
IP Rating Weatherproof IP65
Sensor is triggering unintentionally.
  • ENFORCER Outdoor Wave-to-Open Sensors can be used either indoors or outdoors. However, due to infrared technology limitations, it is recommended that a hood or shield be used when installing outdoors to shield the sensor from direct light (sunlight, reflections from shiny objects, etc.). Direct light may cause the sensor to trigger unintentionally.