SD-9963-KSGQ

Post-Mount Wave-to-Open Sensor with Access Box

The ENFORCER Post-Mount Wave-to-Open Sensor with Access Box and Manual Override Button is a full-featured exit plate which uses IR technology to open a gate or activate a device with the simple wave of a hand reducing the risk of the spread of disease. It is suitable for areas were no special clearance is required for exit and a longer-range sensor may cause unwanted activation. It also includes a manual override button.

  • product_icon
  • product_icon
  • product_icon
  • ETL, Conforms to UL Std. 294
  • Adjustable sensor range up to 7″ (18cm)
  • Weatherproof (IP65) for outdoor use
  • Stainless steel plate
  • Hinged plate easily removes from box for easy wiring
  • 1A Relay, adjustable trigger duration 0.8~30  seconds or toggle
  • Gooseneck- or wall-mountable
  • Manual override button
  • LED-illuminated sensor area for easy identification
  • Selectable LED colors (turns from red to green or green to red) on sensor activation
  • Includes heavy-duty steel box
Operating voltage 12~24 VDC
Current draw
(max. ±10%)
Standby Red: 18mA@12VDC / 23mA@24VDC
Triggered Green: 23mA@12VDC / 29mA@24VDC
Standby Green:  14mA@12VDC/18mA@24VDC
Triggered Red: 28mA@12VDC/35mA@24VDC
Relay type Form C dry contact (SPDT), 1.2A@24VDC
Response time 10ms
LEDs Standby: Red*
Triggered: Green*
Output duration 0.5~30 s or toggle
Range 2″~7″ (5~18 cm)
Destructive attack level Level I
Line security Level I
Endurance level Level IV
Standby power Level I
IP Rating Weatherproof IP65†
Operating Temperature -4º~131º F (-20º~55º C)
Weight 1-lb 9-oz (710g)
Dimensions 4″ x 5-1/2″ x 3″ (102 x 134 x 77 mm)

*Color function reversible †Front panel only

Product Information Sheet (PI)

Manual

FAQs

Answer:

  1. Ensure that no strong direct or reflected light source is reaching the sensor.
  2. Ensure that sensor is sheltered from direct sunlight.
Scroll to Top