SK-1123-FDQ

Vandal Resistant Flush-Mount Access Control Keypad

  • product_icon
  • 12~24 VAC/VDC auto-adjusting operation
  • Up to 1,000 possible user codes (000~999) programmable for output #1 and 100 (001~100) for output #2
  • Up to 50 (01~50) possible temporary visitor codes, which can be programmed for one-time or limited-time use (1~99 hours)
  • Output #1: Form C relay, 1A@30VDC max.
  • Output #2: Transistor ground, 100mA@24VDC
  • Outputs #1 and #2 can be programmed to activate for up to 99,999 seconds (nearly 28 hours)
  • Tamper output: N.C. Dry contact, 50mA@24VDC max
  • Mounts to standard single-gang back box
  • IP66 Weatherproof rating
  • Keypad illuminates when a button is pressed; backlight can be programmed for FULL or AUTO in standby mode
  • All features are programmed directly from the keypad: No need for an external programmer
  • EEPROM Memory protects programmed information in case of power loss
  • Up to 50 (01~50) duress codes for output #1, 10 (01~10) for output #2
  • Duress code signals a silent alarm if an authorized user is forced to open the door under duress
  • Egress input lets users exit the premises without keying in the code
  • Door sensor input for anti-tailgating operation
  • Interlocking input for connecting to a second keypad
Operating Voltage 12~24 VDC/VAC
Current Draw – Standby 15mA@12VDC
Current Draw – Keypress 40mA@12VDC
Current Draw – Output 1 Active 65mA@12VDC
Current Draw – Output 1 & 2 Active 66mA@12VDC
Current Draw – Total Max 100mA@12VDC
Output- #2 Transistor Ground 100mA@24VDC
Output 1 1A@30VDC
Output – Duress 100mA@24VDC
Output – Interlock 100mA@24VDC
Output- Tamper 50mA@24VDC
IP Rating Weatherproof IP66
Input – Egress N.O. Ground
Input – Door Sensor N.C. Ground
Input – Door Inhibit N.O. Ground
Operating Temperature -4°~158° F (-20°~70° C)
Operating Humidity 5~95% Non-condensing
Dimensions 4-3/4″x3-1/8″x1-13/16″ (120x80x46mm)
Weight 16.2-oz (300g)

Product Information sheet (PI)

Manual

User Control Chart

No upsell products found

Scroll to Top