Follow us on:           


Flush-Mount Outdoor Access Keypad (Discontinued)

Model Number: SK-1123-FQ
  • Suitable for flush-mount applications. Fits conveniently in back box
  • 2 Outputs:
    • Main relay (Form C 5A@30VDC).
    • Auxiliary (Transistor ground 100mA@24VDC).
  • Relay can be programmed for momentary (1~999 seconds) or latch
  • Programmable LED keys: Full-time ON, ON when keys are pressed, Full-time OFF; suitable for solar applications
  • Code flexibility: Each code can be 4~8 digits long
  • Egress input for exiting the protected premises
  • Dual voltage: 12~24 VDC/VAC operation
  • Tamper switch: N.C. dry contact 3A@12VDC
  • Mantrap: For a protected area with 2 doors, this feature allows only 1 door to be open at any time
  • All features are programmed directly from the keypad, eliminating the need for an external programmer
  • Duress output: Signals a silent alarm if an authorized user is forced to open the door under duress
  • Door-forced-open and door-propped-open alarm output
  • Door-hold-open mode available
  • Keypad can be programmed to emit beeps for key presses or operate in silent mode
  • Auto or manual code entry checking:
    • Auto: No # key required after each code.
    • Manual: # key must be pressed after every code.
​​Note: The SK-1123-FQ has been replaced by the SK-1123-FDQ
Type Weather-Resistant Digital Access Keypad
Operating Voltage 12~24 VDC/VAC
Current Draw - Standby 10mA@12VDC
Current Draw - Keypress 45mA@12VDC
Current Draw- Relays Active 100mA@12VDC
Number of Coded Outputs 2
Relay Output- #1 5A@30VDC, Form C, NO/C/NC
Relay Output- Transistor Ground 100mA@24VDC
Additional Output Mantrap and duress: 100mA@24VDC
Egress Inputs N.O. ground, 3A@12VDC
Door Sensor Input N.C. ground
Dimensions 4-3/4"x3-1/8"x1-15/16" (120x80x46mm)
Weight 11-oz (300g)