|
 |
SK-1123-FQ 100 users, 2 outputs (1 relay, 1 transistor ground)
|
|
|
- Suitable for flush-mount applications. Fits conveniently in back box.
- 2 Outputs:
- Main relay (Form C 5A@30VDC).
- Auxiliary (Transistor ground 100mA@24VDC).
- Relay can be programmed for momentary (1~999 seconds) or latch.
- Programmable LED keys: Full-time ON, ON when keys are pressed, Full-time OFF; suitable for solar applications.
- Code flexibility: Each code can be 4~8 digits long.
- Egress input for exiting the protected premises.
- Dual voltage: 12~24 VDC/VAC operation.
- Tamper switch: N.C. dry contact 3A@12VDC.
- Mantrap: For a protected area with 2 doors, this feature allows only 1 door to be open at any time.
- All features are programmed directly from the keypad, eliminating the need for an external programmer.
- Duress output: Signals a silent alarm if an authorized user is forced to open the door under duress.
- Door-forced-open and door-propped-open alarm output.
- Door-hold-open mode available.
- Keypad can be programmed to emit beeps for key presses or operate in silent mode.
- Auto or manual code entry checking:
- Auto: No # key required after each code.
- Manual: # key must be pressed after every code.
|
|
|
|
| Type |
Weather-Resistant Digital Access Keypad |
| Operating voltage |
12~24 VDC/VAC |
| Current draw |
|
| Standby |
10mA@12VDC |
| Key pressed |
45mA@12VDC |
| Relay active |
100mA@12VDC |
| Number of coded outputs |
2 |
| Transistor ground output (1) |
100mA@24VDC |
| Relay output (2) |
5A@28VDC, Form C, NO/C/NC |
| Additional output |
Mantrap and duress |
| Egress |
N.O. ground, 3A@12VDC |
| Door sensor input |
N.C. ground |
| Dimensions |
4-3/4"x3-1/8"x1-15/16" (120x80x46mm) |
| Weight |
11-oz (300g) |
|
|
|
| |
Copyright 2010 by SECO-LARM U.S.A., Inc. All rights reserved. Modified:
Supplier of Security Systems and Accessories Worldwide.
