SK-910RB2-4Q

2-Channel RF Receiver, 11~24 VAC/DC, 433.92MHz, two relays

The SK-910RBQ series of wireless receivers meet the growing demand for receivers with multiple, independently-controlled output functions. These RF receivers are compatible with both code hopping and fixed code transmitters. The receivers can be used to remotely control a variety of home automation devices such as garage door openers, lights, motorized gates, lifts, or other devices.

  • product_icon
  • product_icon
  • product_icon
  • product_icon
  • Five programmable relay output modes:
    • 4-Second momentary
    • 1-Second momentary
    • Toggle (ON/OFF)
    • Validity
    • Latch
  • 11~24 VAC/VDC Operation
  • Range: Up to 500ft (150m)*
  • Controls garage doors, gates, house lights, alarm panels or other devices via remote
  • LED indicates RF reception, learn mode entered, transmitter learned, memory cleared, and relay output mode
  • Pushbutton programming, no need to cut jumpers
  • Up to 15 transmitter button codes can be learned

​*Operating range will vary greatly depending on the installation and operating environment.

Operating voltage 11~24 VAC/VDC
Range Up to 500′ (150m) with SECO-LARM transmitter. Range will vary.
Output Mode 4-Second momentary, toggle, latch, validity, 1-second momentary
Current Draw 8mA@12VDC (standby), 30 mA per channel at 12 VDC (activated)
# of Stored Transmitter Codes 15 per channel, 30 per receiver
Extended Range Antenna Compatible Yes (SK-91ERSD)
Compatible Transmitters Fixed Code: 68 Billion codes, CODEBUMP: 18 Quintillion codes
Connectors 8 Quick-connect screw terminals (+, -, with NO/NC/COM for channel 1 and NO/NC/COM for channel 2)
Dimensions 3-1/8″ x 2-9/16″ x 1″ (80 x 65 x 25 mm)
Receiver Outputs Two Form “C” dry relay contacts (N.O./N.C./COM); 10A@24VDC

Product Information Sheet (PI)

Manual

No upsell products found

Scroll to Top