Follow us on:           


2-Channel RF Receiver, 11~24 VAC/DC, 315MHz, two relays

Model Number: SK-910RB2Q
  • 5 Programmable output modes:
    4-Second momentary, toggle, latch, validity (receiver outputs for as long as the transmitter button is pressed), 
    1-second momentary
  • New! 2 Independently programmable channels
  • Compatible with all 315MHz ENFORCER transmitters
  • Use to control garage door opener, house lights, alarm control panel, or other devices via remote control
  • Two Form C dry relay contact (NO/NC/COM) outputs. Rated 10A@24VDC
  • Frequency 315MHz. 433MHz 
  • This revolutionary receiver incorporates:
    --1. Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted 
    RF signals.
    --2.HIGHER SENSITIVITY for greater operating distances.
    --3.UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted.
    --4.GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration
  • 2 LEDs (one for each channel) indicate RF reception, learn mode entered, transmitter learned, memory cleared
  • 2 Mode switches (one for each channel) for easy transmitter learning
  • Learns up to 30 transmitters (15 for each receiver channel)
  • Screw terminals for simple connection
  • Accepts ENFORCER fixed code or CODEBUMP transmitters
Operating voltage 11~24 VAC/VDC
Range Up to 500' (150m) with SECO-LARM transmitter. Range will vary.
Output Mode 4-Second momentary, toggle, latch, validity, 1-second momentary
Current Draw 8mA@12VDC (standby), 30 mA per channel at 12 VDC (activated)
# of Stored Transmitter Codes 15 per channel, 30 per receiver
Extended Range Antenna Compatible Yes (SK-91ERSD)
Compatible Transmitters Fixed Code: 68 Billion codes, CODEBUMP: 18 Quintillion codes
Connectors 8 Quick-connect screw terminals (+, -, with NO/NC/COM for channel 1 and NO/NC/COM for channel 2)
Dimensions 3-1/8" x 2-9/16" x 1" (80 x 65 x 25 mm)
Receiver Outputs Two Form "C" dry relay contacts (N.O./N.C./COM); 10A@24VDC
Tags: receivers, rx