SENSORS & DETECTORS from SECO-LARM®

SS-051ME / SS-051M Dual-stage glass break detectors SS-051ME -- Includes remote microphone with 3-foot long cable for easy mounting and concealment anywhere inside the car. SS-051M -- On-board microphone, no remote microphone necessary. Dual-stage protection -- Chirps siren if window is lightly tapped, triggers alarm upon break-in or vandalism attempts. Protects against a would-be thief's forced entry into the car by breaking the window or punching a door lock. Attractively designed to match the interior of almost any car. Built-in audio discriminator enables the unit to filter out typical outdoor sounds to prevent false alarms. Patented yellow "Turbulence" LED allows accurate setting of sensitivity by warning if environmental noise is too high. Two microfine sensitivity adjustment controls for independent adjustment of interior and exterior zones. Modular plug for fast installation.

SS-052B Dual-stage electromagnetic shock sensor Dual-stage protection -- Chirps siren if car lightly tapped, triggers alarm upon break-in or vandalism attempts. Patented electromagnetic technology prevents false alarms, offers 360º protection. Shielded from electromagnetic interference, so no false alarms from pagers, cell phones, radios, or other electronic devices. Patented yellow "Turbulence" LED pinpoints exact sensitivity by warning the installer if environmental interference is high. Two microfine sensitivity adjustment controls for independent adjustment of interior and exterior zones. Modular plug for fast installation.

SS-052PBE Single-stage electromagnetic shock sensor Single-stage protection -- Triggers alarm upon break-in or vandalism attempts. Patented electromagnetic technology prevents false alarms, offers 360º protection. Shielded from electromagnetic interference so no false alarms from pagers, cell phones, radios, or other electronic devices. Patented plastic mounting bracket. Install in engine compartment or on steering column.

SS-057 Motion/impact sensor Detects vibration or strong shocks caused by hitting, jacking-up, or towing of car. Open or closed, negative or positive trigger circuits. Patented self-lock sensitivity adjustment screw holder for easy pinpoint adjustment. Patented mounting bracket gives 360º protection. Gold-plated contacts (oxidation-, sulfuration-, and corrosion-resistant), assure reliable, long-term operation. Fixed molded contact strips prevent contact point drifting.

SS-053 Mercury switch Protects hood, trunk, or other openings where pin switches are impractical. 15-degree trigger. Open or closed, negative or positive trigger circuits. Small size and pre-wired leads for quick installation. 1A contact rating.

SR-199-315 Auxiliary sensor Y-connector Saves installation time. Allows any two SECO-LARM® dual-stage sensors to be connected to an ENFORCER® alarm with no splicing. Adjust each sensor separately for best sensitivity, with no cross interference. Works with the SLI® 259, SS-052B, SS-051M, SS-051ME.

Page last modified x: