MVE-AH1E1-41NQ

4K HDMI Extender over Single Cat5e/6 (Discontinued)

Discontinued Product: Product replaced by MVE-AH1E1-42NQ

The ENFORCER 4K HDMI Extender over Single Cat5e/6 extends the range of traditional HDMI cabling methods by using an active transmitter and receiver to send video and audio over a single Cat5e/6. HDMI formats as large as 4K can be transmitted 164ft (50m) between the two units with zero signal loss by using integrated circuits in the receiver and transmitter. The extender also supports EDID and bi‑directional IR control for remotely controlling HDMI sources and displays.

  • product_icon
  • product_icon
  • product_icon

Features:

  • Extend HDMI over a single Cat5e/6 cable
  • Supports resolutions from 480i to 4K with zero signal loss
  • Transmits up to 164ft (50m) at 4K over Cat6 cable
  • Plug and play operation – comes as a complete set
  • Bi-directional IR for remote control extension and operation
  • One (1) 12VDC power supply included
Maximum Single Link Range 4K@30Hz
Deep Color 8bit
Video Format Supported High-speed HDMI, HDCP 2.2
Audio Formats Supported LPCM 2/51/7.CH, Dolby Digital, DTS 5.1, Dolby Digital+, DolbyTrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
Output Video HDMI
Resolutions Supported 4K@30Hz/1080p/1080i/720p/576p/576i/480p/480i
Range 1080p: Cat6: Up to 196′ (60m); Cat5e: Up to 98′ (30m)
Range – 4K Cat6: Up to 164′ (50m); Cat5e: Up to 82′ (25m)
Video Amplifier Bandwidth 10.2Gbps
Video Input Connector HDMI Type A 19-pin female
Video Output Connector HDMI Type A 19-pin female
IR Frequency 30 ~ 60 kHz
Power Supply 1A@12VDC (1 Adapter) (2.1mm plug)
ESD Protection (Human Body Model) u00b18kV (air-gap discharge), u00b14kV (contact discharge)
Cat5e/6 Wiring Standard T-568B
Operating Temperature 32u00b0~104u00b0 F (0u00b0~40u00b0 C)
Operating Humidity 20~90% RH (no condensation)
Dimensions 3-7/16″x23 / 8″x11/16″ (88x61x17 mm)
Weight 5.08-oz (144g) (each)

PI SHEET

MANUAL

Scroll to Top