MVD-V1201-1Q

VGA over Cat5e/6 with Audio – 1-In 2-Out (Discontinued)

Discontinued Product

The MVD-V1201-1Q is the perfect device for playing video and audio in both local and remote locations. The MVD-V1201-1Q not only extends the range of traditional VGA cabling methods up to 984’ (300m), but it also transmits to one local and one remote station. The ability to transmit to a remote secondary display makes the MVD-V1201-1Q ideal for video playback in security, business, digital signage, and classroom settings.

  • product_icon
  • Transmits VGA signals from personal computers, DVRs, video splitters, to CRT or LCD monitors or VGA projectors
  • Local output allows for playback at a local station as well as remote stations
  • Extends the range of VGA and stereo signals up to 984ft (300m) over one Cat5e/6 cable
  • Gain and peak adjustments to account for different UTP cable lengths. Use gain for brightness adjustment and peak for skew adjustment
  • Supports up to 1920×1200 resolution
  • Each pair includes one transmitter and one receiver and is plug-and-play ready
  • Works with monitors, projectors, HDTVs, and flat panel screens

​Sold in pairs: Each pair contains one transmitter and one receiver

VGA Connectors Female 15 pin
Number of Inputs 1 (one)
Number of Outputs 2
Number of Local Outputs 1 (one)
Vertical Frequency Range 60/75/85Hz
Range – 640×480; 800×600 984ft (300m)
Range – 1024×768 820ft (250m)
Range – 1280×720; 1280×1024; 1280×768; 1280×960 656ft (200m)
Range – 1600×900; 1600×1200 492ft (150m)
Range – 1920×1080; 1920×1200 459ft (140m)
Size Transmitter- 3-15/16″ x 2-5/8″ x 1″ (100 x 65 x 25.5mm), Receiver- 3-3/16″ x 1-11/16″ x 29/32″ (81.5 x 43 x 23mm)
Weight Transmitter- 7.3-oz (208g), Receiver- 3.8-oz (108g)
Current Draw 400mA@5VDC
Operating Temperature 32°~158° F (0°~70° C)
Operating Humidity 10%~85% RH
Storage Temperature 14°~176° F (-10°~80° C)
External Power Supply 2A@5VDC (2 adapters included)

Product Information Sheet (PI)

Download File

MANUAL

Download File
Image is weak, faded, or blank
  • Reduce cable length.
  • Replace with a higher-grade cable. MVD-V1201-1Q works with Cat5, but Cat5e and Cat6 allow for maximum range.
  • Adjust gain and peak.
  • Check to make sure one power supply is connected to the transmitter and another is connected to the receiver.
  • Check the power supplies of all devices connected to the extender.
  • Make sure the extender is powered on both sides.
  • Make sure the source and displays are powered.
  • Make sure the transmitter and receiver are plugged into the correct units

No upsell products found

Copyright ©2024 by SECO‑LARM U.S.A., Inc. All rights reserved. Supplier of Security Systems and Accessories Worldwide. The SECO‑LARM policy is one of continual development. For that reason, SECO‑LARM reserves the right to change specifications without notice. SECO‑LARM is not responsible for misprints or typographical errors.

Scroll to Top