EV-Y6201-A3WQ

4-in-1 HD TVI, CVI, AHD, Analog UFO Camera (Discontinued)

Discontinued Product

  • product_icon
  • product_icon
  • product_icon
  • 1080p Resolution
  • 3.7mm Pinhole lens rotates to nearly any angle for flexible installations
  • 3D-NR (3D Digital Noise Reduction)
  • DWDR (Digital Wide Dynamic Range)
  • Low 0.1 Lux rating
  • Joystick OSD control for easy camera programming
  • Small size protrudes only 1″ (26mm)
  • Weatherproof (IP66) construction
  • Low-profile design blends in with nearly any decor
Housing Color White
Type Flush-Mount UFO Camera
Image sensor 1/2.9″ 2MP Sony CMOS
Formats TVI (default) / CVI / AHD / Analog
Resolution 1920×1080
Viewing Angle 80°
TV Lines 1200TVL
3D-NR Yes
2D-NR Yes
DWDR Yes
Cable OSD Control Yes
On Screen Display (OSD) Yes
Megapixels 2MP
Minimum Illumination 0.1Lux
Video Output 1.0Vp-p Complex video output
FPS 30FPS
Lens 3.7mm Pinhole lens
F Stop F1.4
S/N Ratio 50dB
DSS (Digital Slow Shutter) Yes
Shutter Control Auto/Manual (x30~1/50000), FLK
Operating Voltage 12VDC
Current Draw 90mA
Gamma Correction 0-1
Gain Control Yes
White Balance Auto, Day & Night
IP Rating IP66
Operating Temperature -4°~131° F (-20°~55° C)
Dimensions 3″x3″x1″ (77x77x26 mm) (Protruding from wall)
Weight 9.9-oz (280g)

Product Information Sheet (PI)

Manual

On-Screen Display Manual

Advertisement

FAQs

Check that the correct power supply is in use.

Change the position of the camera.

Adjust the monitor’s contrast knob. Change the position of the camera.

Clean the lens using a soft, clean cloth. Check that the light source is adequate.

Change the position of the camera.

  1. Check that the camera is powered up.
  2. Check that the power supply’s polarity is correct. Check that the monitor is powered up.
  3. Check that the video cable connecting the camera to the monitor is connected properly.

No upsell products found

Scroll to Top