NE-AE01-030TQ

Ethernet over Coax with PoE (Discontinued)

ENFORCER Ethernet over Coax with PoE is designed to connect a camera with PoE or other PoE device using existing coax cables at distances up to 984ft (300m), providing both data and power over a single coax cable. It is compatible with any camera with PoE and is perfect for replacing an analog camera with a camera with PoE without expensive rewiring.

  • product_icon
  • product_icon

Discontinued Product

  • Extends powered Ethernet devices, such as cameras with PoE, over existing coax cables
  • Connects cameras with PoE to 10/100BaseT PoE Injector/Switches over single coax cable
  • Supports PoE: IEEE802.3af/at
  • Supports 10/100 Mbps transmission rate
  • Can extend up to 984ft (300m)
  • Sold as a set
Link Connection BNC
Ethernet Connection RJ45
Linking Cable 75Ω coax cable
Ethernet Speed 10/100 Mbps
Transmission Range 984ft (300m)
PoE Standard IEEE 802.3af/ IEEE 802.3at
PoE Mode Setting Mid-span/End-span
LED Indicator Power (green)
Current Draw 1.25W
Operating Temperature 32º~131º F (0º~55º C)
Dimensions 2-5/8” x 3-7/16” x 1-1/16” (67 x 87 x 27 mm)
Weight 5.3 oz. (150g)

Product Information Sheet (PI)

Manual

 

PoE device doesn’t
function properly
  • If distance is over 328ft (100m), ensure that the link speed is set to 10Mbps
  • Check that the PoE mode switch is set correctly and is the same on both transmitter and receiver
  • Make sure the input device is turned on
  • Make sure the output device is turned on
  • Test the coax cable between the receiver and transmitter to make sure it is operational
  • Try installation again using the crossover cables and setting the PoE mode switch to “End Span” in the process described in “Sample Installation” on pg. 3

 

 

No upsell products found

Scroll to Top