EV-Y2501-AMGQ

4-in-1 HD TVI, CVI, AHD, Analog Varifocal Turret Camera

  • product_icon
  • product_icon
  • product_icon
  •  5MP Resolution
  •  ICR Module
  •  Joystick OSD control
  •  2DNR (Digital Noise Reduction)
  •  D-WDR (Digital Wide Dynamic Range)
  •  Heavy-duty vandal-resistant design
  •  Rugged, weatherproof (IP66) construction
  •  Split-glass design eliminates IR reflection
  •  Cables concealed in bracket to prevent tampering
  • Junction box is not included with the product
Housing color Gray
Formats TVI (Default) / CVI / AHD / Analog (CVBS)
CMOS 1/2.7″ 5MP CMOS
Resolution (HD) 2592×1944
2DNR Yes
D-WDR Yes
OSD (On-Screen Display) Yes
Cable OSD control Yes
Megapixels 5MP
Lens 2.8~12mm ICR
Viewing Angle 38°~138°
# of IR LEDs 40 (SMT)
IR Range Up to 148ft (45m)
FPS 20FPS
F Stop 2.0
Minimum illumination – IR On 0Lux
Minimum illumination – IR Off 0.05Lux
S/N Ratio 35dB
Shutter control Auto
Gain control Auto
Operating voltage 12VDC
Current Draw – IR On 440mA
Current Draw – IR Off 80mA
IP Rating Weatherproof IP66
Operating temperature -22°~131° F (-30°~55° C)
Dimensions ø4-15/16″x4-5/16″ (ø125x110mm)
Weight 1-lb, 9.3-oz (720g)

Product Information sheet (PI)

Manual

On-Screen Display Manual

Advertisement

FAQs

Check that the correct power supply is in use.

Change the position of the camera.

Adjust the monitor’s contrast knob. Change the position of the camera.

Clean the lens using a soft, clean cloth. Check that the light source is adequate.

Change the position of the camera.

  1. Check that the camera is powered up.
  2. Check that the power supply’s polarity is correct. Check that the monitor is powered up.
  3. Check that the video cable connecting the camera to the monitor is connected properly.
Scroll to Top