EV-N5205-3S4Q

IP Wall-Plate Camera

  • product_icon
  • product_icon
  • product_icon
  • 1/2.8″ 2MP Sony STARVIS CMOS
  • H.265, H.264/MJPEG, Tri-stream IP Camera
  • Max. 30FPS/Full HD 2MP (1920×1080)
  • 2.5mm lens with ICR
  • Remote access via web browser
  • Event Alarm, E-mail, FTP Function
  • Vandal-resistant metal front panel
  • 3DNR & D-WDR
  • 12VDC, PoE (IEEE 802.3af)
  • IP65 Weather-resistant*

​*Use silicone sealant for weather-resistant installation

 

Type Wall-plate Camera
Sensor 1/2.8″ 2MP Sony STARVIS™ CMOS
Video encoding H.265, H.264, MJPEG
Resolution 2MP, (1920×1080)
DNR 2DNR: Yes
3DNR: Yes
D-WDR Yes
Lens 2.5mm ICR
Viewing Angle 120°
Minimum Illumination 0.01 Lux
F Stop 2.0
Gamma correction 0.45
S/N Ratio 50dB
Gain control Auto
White balance Auto
Operating voltage 12VDC, PoE (IEEE 802.3af)
Current draw 140mA max.
Operating temperature 32°~122° F (0°~50° C)
Dimensions 2-3/4″x4-1/2″x3-1/16″ (70x114x78 mm)
Weight 3.8-oz (110g)

 

Product Information sheet (PI)

Manual

CD Content

FAQs

Check that the correct power supply is in use.

Change the position of the camera.

Adjust the monitor’s contrast knob. Change the position of the camera.

Clean the lens using a soft, clean cloth. Check that the light source is adequate.

Change the position of the camera.

  1. Check that the camera is powered up.
  2. Check that the power supply’s polarity is correct. Check that the monitor is powered up.
  3. Check that the video cable connecting the camera to the monitor is connected properly.
Scroll to Top