EV-Y2251-A2WQ

4-in-1 HD 2MP Fixed Turret Camera

The EV-Y2251-A2WQ provides a high definition output in multiple formats suitable for any HD analog installation.  It can be installed indoors or outdoors.

  • product_icon
  • product_icon
  • product_icon
  • 2MP Resolution
  •  ICR Module
  •  2DNR & 3DNR (Digital Noise Reduction)
  •  Heavy-duty vandal-resistant design
  •  Rugged, weatherproof (IP66) construction
  •  Split-glass design eliminates IR reflection
  •  Cables concealed in bracket to prevent tampering
  • Junction box is not included with the product
Housing color White
Formats TVI (Default) / CVI / AHD / Analog (CVBS)
CMOS 1/2.7″ 2MP CMOS
Resolution (HD) 1920×1080
3DNR Yes
2DNR Yes
D-WDR Yes
OSD (On-Screen Display) Yes
Cable OSD control Yes
Megapixels 2MP
Lens 2.8mm ICR
Viewing Angle 121°
# of IR LEDs 18 (SMT)
IR Range Up to 65ft (20m)
FPS PAL:25FPS NTSC:20FPS
F Stop F1.6
Minimum illumination – IR On 0 Lux
Minimum illumination – IR Off 0.05 Lux
S/N Ratio 35dB
Shutter control Auto
Gain control Auto
Operating voltage 12VDC
Current Draw – IR On 320mA
Current Draw – IR Off 80mA
IP Rating Weatherproof IP66
Operating temperature -22°~131° F (-30°~55° C)
Dimensions ø3-15/16″x3-9/16″ (ø100×90 mm)
Weight 16.72-oz (474g)

PI Sheet

Manual

On-Screen Display Manual

FAQs

Check that the correct power supply is in use.

Change the position of the camera.

Adjust the monitor’s contrast knob. Change the position of the camera.

Clean the lens using a soft, clean cloth. Check that the light source is adequate.

Change the position of the camera.

  1. Check that the camera is powered up.
  2. Check that the power supply’s polarity is correct. Check that the monitor is powered up.
  3. Check that the video cable connecting the camera to the monitor is connected properly.
Scroll to Top