Language

Categories

Passive CCTV balun with ground loop isolator (Discontinued)

Model Number: EVT-PB1-V1TGQ
The new EVT-PB1-V1TGQ video balun with ground-loop isolator provides an inexpensive, flexible solution for dealing with ground loops on CCTV signal lines. 

The EVT-PB1-V1TGQ is a Passive Video Balun with Ground Loop Isolator. A Passive Video Balun allows a CCTV camera's video signal to be transmitted over low-cost CAT5 unshielded twisted pair (UTP) cable instead of costly coax cable. Suitable for full-motion color and monochrome cameras, they provide a quick, low-cost way to connect CCTV cameras to a monitor, multiplexer, or video recorder at up to 980ft away. 


Video ground loop isolators are passive devices that help to reduce ground loop interference caused by multiple building grounds and differences in ground potential. Ground loop isolators can be installed in new installations or added to existing installations. Video ground loop isolators should be installed on the camera side of your cable.

 
  • Transmits a video signal up to 980ft (300m).
  • Built-in ground loop isolation.
  • Built-in surge protector.
  • Gold-plated BNC connector improves reliability and life.
  • RoHS compliant.
  • Passive operation - No external power required.
  • Uses low-cost Cat5e/6 cable instead of costly coaxial cables.
  • High immunity from interference - Built-in impedance-coupled device and noise filter. Helps to reduce RF interference, cross talk, picture tearing, and other picture quality problems.
  • BNC and removable terminal block.
  • Small size, only 31/8"x13/16"x11/16" (79x30x26 mm). Note: case alone is 21/8" (54mm).
Tags: