E-931-S45RRQ

45Ft Reflective Photoelectric Beam Sensor

  • product_icon
  • product_icon
  • 12~250 VAC/VDC.
  • Weatherproof (IP66) construction for indoor/outdoor usage.
  • Includes 3-inch round reflector and hood.
  • Pre-wired 6ft (2m) Cord.
  • Bracket and mounting hardware included. Includes two sensor mounting brackets.
  • Adjustable sensing distance and response time – 5~100ms.
Typical Applications
  • Sensor for garage doors, outdoor gates or overhead doors.
  • Sensor for industrial automation to detect objects on manufacturing line.
  • Entry detection for store fronts.
  • Assist in measuring parking distance.
  • Alarm sensor.
Type NIR Reflective
Current Draw Standby- 70mA@12VDC, Active- 55mA@12VDC
Sensing Range 0.5′ to 45′ (0.1 – 14m)
Operating Voltage 12~250 VAC / VDC
Reaction time 5ms~100ms adjustable
Light Source IR LED
LEDs – Red Trigger
LEDs – Yellow Alignment
Output SPDT Relay Output (NO/NC/COM)
Switching Capacity 3A@120VAC / 3A@30VDC
Operating Temperature -4º~131º F (-20º~55º C)
Enclosure IP66 Waterproof

Product Information Sheet (PI)

MANUAL

Sensor does not detect the object.
  • Change the angle of the sensor or readjust the sensitivity setting
Yellow LED does not turn on
  • Clean the sensor and reflector with a damp (not wet) cloth
  • Apply a coating of RainX™ to the reflector and the face of the sensor to help keep the units clear of moisture.
  • Adjust the reflector and/or sensor for proper alignment
Red LED lights when object is detected, but no output.
  • Check cable from sensor to alarm device. Test sensor​.

No upsell products found

Scroll to Top