Language

Follow us on:           

Categories

Wave-to-Open Sensor - White plate

Model Number: SD-927PWCQ
The ENFORCER Wave-to-Open Sensor uses IR technology to request egress from a protected area or activate a device with the simple wave of a hand. Since no touch is required, this sensor is suitable for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.

  • Range up to 2" (5cm)
  • White plastic single-gang plate
  • 3A relay, triggers minimum 0.5 sec or as
    long as hand is near the sensor
  • Quick connect screw-less terminal block
  • LED illuminated sensor area for easy identification.
  • Selectable LED colors (turns from red to green or green to red) to show sensor activated.
Type Wave-to-Open Sensor Wall Plates
Current Draw [email protected]
Sensing Range Up to 2" (5cm)
Operating Voltage 12VDC
Reaction time 10mS
LEDs - Red Standby
LEDs - Green Triggered
Relay Type Form C (NO/NC/COM) [email protected]
Output Time 0.5S or as long as unit is triggered
Switching Capacity [email protected]
Operating Temperature -4°~131° F (-20°~55° C)
Dimensions 4-1/2" x 2-3/4" x 1-5/16" (115 x 70 x 33.5 mm)
Weight 2.5oz (70g)