Language

Follow us on:           

Categories

1,200-lb Electromagnetic Lock with LED, Bond & Door Position Sensor, UL Listed

Model Number: E-941SA-1K2DPSQ
  • UL 294 Listed (Access Control)
  • Built-in bond sensor with 3A-amp dry relay output for monitoring door lock status
  • Built-in dual-color status LED shows lock status
  • Built-in door position sensor shows open/closed status (1/2” gap)
  • Armature plate holder for door position sensor
  • Dual voltage: 12/24VDC selectable
  • Anodized aluminum housing (US28)
  • No residual magnetism
  • MOV surge protection
  • Detachable faceplate
  • Adjustable mounting bracket
  • Complete mounting hardware for typical installations
  • “L” bracket (E-941S-1K2/LQ), “Z” brackets (E-941S-1K2/ZQ) available for easy mounting
  • Lifetime Limited Warranty*

*Contact SECO-LARM for details. Applies in U.S.A. & Canada only.
Endurance Level IV
Destructive attack Level 1
Line security Level 1
Standby power Level 1
Holding Force 1,200-lb
UL Listed UL 294, ULC S104, UL10B, UL10C
Operating Voltage 12/24 VDC
Current Draw 12VDC: 500mA 24VDC: 250mA
Housing material Reed switch, [email protected]
Operating Temperature 32°~120°F (0°~49°C)
Electromagnet Dimensions 10-1/2"x2-7/16"x1-9/16" (267x62x40 mm)
Armature Dimensions 7-1/4"x2-7/16"x5/8" (185x62x16 mm)
Bond Sensor SPDT relay, [email protected]

Doors lock, but can easily be forced open
 
  • Make sure the electromagnet and armature plates are properly aligned.
  • Make sure the contact surfaces of the electromagnet and armature plates are clean and free from rust.
  • Check the power leads with a meter, and make sure 12VDC or 24VDC is present.
  • Make sure the rubber washer is installed and free from damage. 

Delay in door releasing 
 
  • The electromagnet is fitted with a metal oxide varistor to prevent interference, so do not install a second diode.
  • Ensure that the control device is connected between the power source and the positive terminal of the lock