EVT-AB1Q

Active Video Balun with Data & Surge Protection & Interlocking Design – Set: (TX) + (RX) (discontinued)

Model Number: EVT-AB1Q

The fast, easy, and low-cost way to connect a CCTV camera to a monitor, multiplexer, or video recorder. These amplified video baluns allow the video signal of a single CCTV camera to be transmitted long distances over low-cost Cat5e/6 unshielded twisted pair (UTP) cable. They are great for both full-motion color and full-motion monochrome cameras, and increase the flexibility of where such cameras can be mounted. These CCTV baluns also work over existing UTP cabling, making them perfect for use in nearly any building or across an  entire campus.

  • Transmits a monochrome video signal up to 1.5 miles (2.4km) or color up to 0.9 miles (1.5km)
  • 12VDC power – adapter included, or optional 24VAC transformer
  • Uses low-cost Cat5e/6 cable instead of costly coaxial cables
  • Includes a BNC connector and terminal blocks – No need to waste time crimping RJ-45 connectors
  • High immunity from interference – Built-in impedance coupled device and noise filter
  • Easy installation
  • Gold-plated BNC connector for added reliability and longer life
Blue LED Power on/off
Max. Range Color 5,000′ (1,524m), B/W 8,000′ (2,438m), Active Rx & passive balun- Up to 3,000′ (914m)
Maximum input 1.0Vp-p, 75Ω, BNC connector
Insertion loss < 2dB per pair from DC~5Hz
Return loss > 15dB from DC~5MHz
Common Mode Rejection 60dB, 15KHz~5MHz
Power 12/24 VDC. 12VDC adapter included (can accept either regulated or unregulated)
Wire Type UTP (Unshielded Twisted Pair) 16~24 AWG
Wire Category Category 2 or better
Impedance (BNC): 75Ω@1MHz, Terminal Block: 100Ω@1MHz
Attenuation DC~5Hz, 1.5dB max
Frequency response DC~5MHz
Surge Protection Surge ratings IPP: 100 Amp at 10µsec. x 1000µsec. Max peak current: 250 Amp at 8µsec. x 20µsec., transient voltage surge suppressors
UTP Connection Terminal Blocks
Video Format RS170, NTSC, PAL, SECAM, CCIR
Operating Humidity 0~95%
Operating Temperature 7°~329° F (-14°~165° C)
Case Black ABS Plastic
Weight Tx: 3.4 oz. (95g), Rx: 3.0 oz. (84g)
Adjustments Tx – 3 positions, Rx – 5 dip switches (32 combinations)
Current Draw 40mA Tx, 60mA Rx @ 12VDC

No upsell products found

Scroll to Top