E-921APQ

Auto Dialer for Security Systems (Discontinued)

  • product_icon

Discontinued Product: Replaced by E-922CPQ
When triggered by an alarm system, the ENFORCER Auto Dialer can call up to 5 numbers and deliver a beep alert repeatedly for one minute. The receiver can then listen in to the room occupants or can disarm the system. The dialer includes a home mode (acting like a door chime when the owner is present) and a panic button. The 105dB built-in siren alarm can be programmed on or off.

  • 16-Digit large display with date/time and function icons
  • 2 (N.C.) Triggers for multiple zone security
  • Remote monitoring – user can call in to listen in to room sounds and arm/disarm dialer
  • Remotely listen in to room sounds or disarm during call back
  • Programmable PIN number and entry delay timing
  • 5 Programmable emergency telephone numbers (up to 32 digits each)
  • Programmable auto-dialing cycle repeat times
  • Home mode function (acts as a door chime when user is at home)
  • Panic button
  • Built-in flash memory to protect against system data loss in case of power failure
  • Touch-tone dialing
  • Phone jack
  • Low-battery indicator for backup battery (battery not included)
  • DC Power input jack (3.5mm phone jack, not included)
  • 9V Battery backup (battery not included)
  • Wall-mountable
  • Built-in 105dB alarm (with programmable alarm on/off)
  • Built-in auxiliary output for external alarm or siren

E-921CPQ / E-921APQ Comparison

NOTE: Designed to work with single-line analog phone lines

Operating Voltage9~12VDC
Current Draw Max. (at 12VDC) – Standby5mA
Current Draw Max. (at 12VDC) – Dialing10mA
Current Draw Max. (at 12VDC) – Alarm On180mA
Current Draw Max. (at 12VDC) – Total310mA
Programmable Emergency Phone Numbers5
Maximum Digits per Telephone Number32
Backup Battery Type/Life (Not Included)9VDC / ~20hr
Alarm Sound Level at 12″ (30cm)≥105dB
Trigger Inputs2 x N.C. Trigger
Trigger Input Timer≥500ms
Auxiliary Output Current (Max.)125mA
Operating Temperature32º~+104º F (0º~40º C)
Storage Temperature-4º~140º F (-20º~+60º C)
Weight6.2-oz (175g)
Dimensions3-3/8″ x 4-5/16″ x 1-7/8″ (86 x 110 x 47 mm)
PI SHEET (pdf, 0KB)
MANUAL (pdf, 0KB)
Scroll to Top