Stand-Alone Proximity Reader with Wiegand

PR-3125-PQ

Stand-Alone Proximity Reader with Wiegand

The ENFORCER Stand-alone / Wiegand proximity reader is an advanced security solution that offers both efficiency and convenience. This versatile device can function as a stand-alone controller or a Wiegand reader. The reader’s unique feature of adding multiple cards in bulk at once significantly streamlines access control management in large organizations.

  • product_icon
  • product_icon
  • product_icon
  • 12~18 VDC Operation
  • Low current draw – 120mA max.
  • Form C relay output – 2A@12VDC
  • Built-in tamper alarm and external alarm output
  • Outdoor rated – IP66 weatherproof
  • Can serve as Wiegand output reader or controller, output and input – 26~44 bits
  • EM 125kHz Proximity card reader
  • 2-Door interlock
  • Easy duplication of users to additional devices
  • Bulk adding of multiple cards at a time
Operating Voltage12~18 VDC
Current DrawStandby: 30mA@12VDC
Active: 120mA@12VDC (max.)
OutputsForm C: 2A@12VDC
Alarm:2A@12VDC
Wiegand: 26~44 bits
InputsWiegand: 26~44 bits, PIN input – 4, 8, or 10 bits
Egress: N.O. Ground
Door sensor: N.C. Ground
Card typeEM 125kHz
Enclosure materialBlack ABS plastic
Operating temperature-40°~140° F (-40°~60° C)
Operating humidity0~98% non-condensing
Dimensions2-15/16″x4-5/8″x13/16″ (75x117x20 mm)
Weight7-oz (200g)
Product Information Sheet (PI) (pdf, 281KB)
Download
MANUAL (pdf, 627KB)
Download
Comparision Chart (pdf, 215KB)
Download
Unit fails to accept a new user/duress card
  • Ensure the User ID assigned is between 0 and 997 for users and either 998 or 999 for duress cards
  • Ensure the user card is not already assigned to another user
Unit fails to respond to a programmer user card
  •  Ensure the unit is in standby mode by pressing the key until the LED becomes steady red

You may also like…

Scroll to Top