PR-3125-PQ

Stand-Alone Proximity Reader with Wiegand

  • product_icon
  • product_icon
  • product_icon

• 1,000 Users (up to 998 users and 2 duress users)
• 9~24 VDC Operation with low current draw – 90mA max.
• Form C relay output – [email protected]
• Adjustable output time – 0.5~99s, or toggle
• Built-in tamper alarm and external alarm output
• Multicolor status LED
• EEPROM Memory protects programmed information in case of power loss
• Includes remote programmer
• Egress input lets users exit the premises without using a card
• Can serve as either Wiegand reader or controller, both output and input are selectable from 26~37 bits
• Uses EM 125kHz cards – 10 User cards included
• 2-Door interlock
• Extreme cold tolerance to -40° F (-40° C)
• Epoxy-filled ABS plastic housing, Weatherproof (IP66)
• Easy duplication of users to additional devices

Operating Voltage 9~24 VDC
Current Draw – Standby [email protected]
Current Draw – Active [email protected] (max.)
Outputs – Wiegand EM – 26 bits
Card type 125kHz EM
Card read range 0~2″ (0~5 cm)
IP Rating Weatherproof IP66
Enclosure material Black ABS plastic
Operating temperature -40°~140° F (-40°~60° C)
Operating humidity 10~98% non-condensing
Dimensions 2-15/16″x4-3/4″x13/16″ (75x120x20 mm)
Weight 6.5-oz (185g)

Product Information Sheet (PI)

MANUAL

Unit fails to accept a new user/duress card
  • Ensure the User ID assigned is between 0 and 997 for users and either 998 or 999 for duress cards
  • Ensure the user card is not already assigned to another user
Unit fails to respond to a programmer user card
  •  Ensure the unit is in standby mode by pressing the key until the LED becomes steady red

No upsell products found

Scroll to Top