Fingerprint Reader and Keypad

SK-2612-SFSQ

Fingerprint Reader and Keypad

The ENFORCER Fingerprint Reader and Outdoor Keypad is an advanced security solution that offers both efficiency and convenience. This versatile device can function as a standalone controller or a Wiegand reader.

  • product_icon
  • product_icon
  • product_icon
  • 12VDC Operation
  • Low current draw – 210mA max.
  • Form C relay output – 2A@12VDC
  • Adjustable output – 1~99 seconds or toggle
  • Built-in tamper alarm and external alarm output
  • Up to 1,000 users
  • Door-propped-open / door-forced open alarm
  • Outdoor rated – IP66 weatherproof
  • Can serve as Wiegand reader, output – 26~37 bits
  • 2-Door interlock
  • 500 DPI Optical fingerprint reader with illuminated fingerprint window
  • Fingerprint identification time – ≤1 second
  • Fingerprint false acceptance rate – ≤0.01%
  • Fingerprint false rejection rate – ≤0.1%
Operating Voltage12VDC
Current DrawStandby: 60mA@12VDC
Active: 210mA@12VDC (max.)
OutputsForm C: 2A@12VDC
Alarm: Transistor ground, 2A@12VDC
Wiegand: 26~37 bits
InputsWiegand: 26~37 bits, PIN input – 4, 8, or 10 bits
Egress: N.O. Ground
Door sensor: N.C. Ground
Enclosure materialZinc alloy
Operating Temperature-40°~140° F (-40°~60° C)
Operating Humidity20~90% non-condensing
Dimensions2-1/4″x5-3/8″x1″ (58x137x26 mm)
Weight18.25-oz (516g)
Manual (pdf, 580KB)
Download
Product Information Sheet (PI) (pdf, 232KB)
Download
Comparison Chart (pdf, 139KB)
Download
Unit fails to accept a new fingerprint
  • Ensure the User ID assigned is between 1 and 1000
  • Ensure the User ID has not been assigned to another user
Unit fails to accept a new user code
  • Ensure the User ID assigned is between 1001 and 3000
  • Ensure the user code is between 4~6 digits long and not already assigned to another user
Unit fails to read a programmed fingerprint
  • Ensure the finger being presented is the same finger that was originally programmed
  • Press the finger evenly on the central area of the reader
  • Ensure the reader window is clean
Unit fails to respond to a programmed
fingerprint or user code
  • Ensure the unit is in standby mode by pressing the * key until the LED becomes steady red
Scroll to Top