- 600-lb (272kg) Holding force
- MOV surge protection
- Adjustable mounting bracket
- Complete mounting hardware for typical installations
- “L” bracket and “Z” brackets available for easy mounting
- Detachable faceplate
- 12/24VDC selectable
- Built-in status LED shows locked/unlocked status
- Built-in bond sensor with 1A@30VDC dry relay output for monitoring door status
| Holding Force | 600-lb (272kg) |
| Operating Voltage | 12/24 VDC (selectable) |
| Current Draw | 500mA@12VDC, 270mA@24VDC |
| Bond Sensor | SPDT relay, 1A@30VDC |
| Status LED | Yes |
| Operating Temperature | 32º ~ 120º F (0º ~ 49º C) |
| Dimensions – Magnet | 9-13/16″x1-11/16″x1″ (250x43x25 mm) |
| Dimensions – Armature | 7-1/4″x1-1/2″x1/2″ (185x38x12 mm) |
| Destructive attack | Level I |
| Line security | Level I |
| Standby power | Level I |
| Endurance | Level IV |
| Weight | 4-lb 6-oz (2kg) |
FAQs
- Check to make sure the wires are securely tightened to the terminal block.
- Check that the power supply is connected and operating.
- Make sure the rubber washer is installed and free from damage.
- Make sure the electromagnet and armature plate are properly aligned.
- Make sure the contact surfaces of the electromagnet and armature plate are clean and free from rust.
- Check the power leads with a meter, and make sure 12VDC or 24VDC ispresent.
- Make sure the rubber washer is installed and free from damage.
Wipe the surface of magnet lock with anti-rust oil regularly.
