| The screen is black |
- Check that the camera is powered up.
- Check that the power supply’s polarity is correct.
- Check that the monitor is powered up.
- Check that the video cable connecting the camera to the monitor is connected properly.
|
| The screen image is dim |
- Clean the lens using a soft, clean cloth.
- Check that the light source is adequate.
|
| The screen image has poor color tone or flickers |
- Adjust the monitor’s color tone.
- Adjust the monitor’s brightness.
- Change the position of the camera.
- Use untwisted wire and make sure the wiring distance does not exceed 230ft (70m)
|
| The screen image is distorted. |
- Change the position of the camera.
- Use untwisted wire and make sure the wiring distance does not
exceed 230ft (70m)
- Check End-of-Line resistor jumper is adjusted correctly on all monitor
|
| The camera case is hot. |
- Check that the correct power supply is in use.
|
| LEDs do not turn on. |
- Check that the correct power supply is in use (18VDC).
- Check that the wiring distance does not exceed 230ft (70m)
|
| Lock button does not operate the relay |
- Check that the correct power supply is in use (18VDC).
- Check that the wiring distance does not exceed 230ft (70m)
|
