E-936-S45RRGQ

Reflective Photoelectric Beam Sensor – ETL UL325 Compliant, 45ft

  • product_icon
  • product_icon
  • product_icon
  • Range: 45ft (14m)
  • Weatherproof (IP66) construction for indoor/outdoor use
  • Pre-wired 6ft (1.8m) cord
  • Bracket and mounting hardware included for both sensor and reflector
  • Adjustable sensing range
  • Compact size
  • Monitoring method: N.C., 10kΩ resistor

Typical Applications

  • Sensor for garage doors, outdoor gates or overhead doors
  • Industrial automation sensor to detect objects on  manufacturing line
  • Entry detection for store fronts
  • Assist in measuring parking distance
  • Alarm sensor
Type Retro Reflective Photoelectric Beam Sensor
Current Draw Standby- [email protected], Active- [email protected]
Sensing Range 0.5′ to 45′ (0.2 – 14m)
Operating Voltage 12-30VDC/AC 60Hz, 100mA
Reaction time 10mS
Light Source IR LED
LEDs – Red Power on
LEDs – Yellow Alignment
Alarm Output SPDT Relay Output (NO/NC/COM)
Switching Capacity [email protected]/VDC
Operating Temperature -4º~131º F (-20º~55º C)
Enclosure IP66 Waterproof
Mounting Brackets Included

Product Information Sheet (PI)

Download File

Manual

Download File

Diagram

Download File
Sensor does not detect the object.
  • Change the angle of the sensor or readjust the sensitivity setting
Yellow LED does not turn on
  • Clean the sensor and reflector with a damp (not wet) cloth
  • Apply a coating of RainX™ to the reflector and the face of the sensor to help keep the units clear of moisture.
  • Adjust the reflector and/or sensor for proper alignment
LEDs turn off when object is detected, but no output
  • No continuity between sensor and alarm device. Check cable from sensor to alarm device. Test sensor.

No upsell products found

Copyright ©2023 by SECO‑LARM U.S.A., Inc. All rights reserved. Supplier of Security Systems and Accessories Worldwide. The SECO‑LARM policy is one of continual development. For that reason, SECO‑LARM reserves the right to change specifications without notice. SECO‑LARM is not responsible for misprints or typographical errors.

Scroll to Top