E-960-D90GQ

Twin Photobeam – ETL UL325 Compliant, 90ft Outdoor

Long Range Photobeam Detectors are easy-to-install with laser beam alignment and provide extended range. Designed to provide reliable perimeter security, both indoors and outdoors.

  • product_icon
  • product_icon
  • product_icon
  •  Twin beams provide reliable perimeter security, minimizing false alarms from birds, falling leaves, etc.
  • Lensed optics reinforce beam strength and provide excellent immunity to false alarms due to rain, snow, mist, etc.
  • Weatherproof, sunlight-filtering case for indoor and outdoor use
  • Non-polarized power inputs
  • Automatically adjusts beam strength to compensate for different weather conditions
  • Automatic input power filtering with special noise rejection circuitry
  • NO/NC trigger output
  • N.C. tamper circuit included
  • Quick, easy installation with built-in laser beam alignment system
Max. range (outdoor)90′ (30m)
Max. range (indoor)190′ (60m)
Current draw50mA max. (laser alignment only)
150mA max. (active operation excluding laser alignment)
Operating Voltage12~30 VDC/VAC 60Hz, 200mA
Detection methodSimultaneous breaking of 2 beams
Interrupt speed10ms
Trigger outputSPDT NO/NC/COM relay, 1A@30 VDC/VAC, with built-in 10kΩ resistor on N.O. output
Tamper output (TX & RX)N.C. switch, 1A@30 VDC/VAC
Sensor LED (RX)Red LED – ON: When the transmitter and receiver are not aligned or the beam is broken.
Signal LED (RX)Yellow LED – ON: When the receiver’s signal is weak or the beam is broken.
Power LED (TX & RX)Green LED ON: Indicates connected to power
Laser wavelength 650nm
Laser output power<5mW
Alignment angleHorizontal: ±90°, Vertical: ±5°
Operating temperature-13°~131° F (-25°~55° C)
Weight2.5-lb (1.1kg)
CasePC Resin

 

Product Information Sheet (pdf, 225KB)
Manual (pdf, 572KB)
Scroll to Top